User manual GEHA A3 PREMIUM

[. . . ] Carefully read these operating instructions in full. Never immerse the power cable, plug, etc. Otherwise, there is a risk of electric shock. [. . . ] - Photos must be dry before being laminated. - Do not laminate any thick or heavy documents as these might get stuck in the laminator. - The laminator permanently connects the laminating film with the item being laminated. the laminating film cannot be removed later. - We advise against laminating collector items which you might want to later remove from the laminating film. It is not permitted to laminate coins and thicker objects with this appliance. ), the device is operational as soon as the green LED lights up. the laminator requires about 3­5 minutes to warm up. B) If you have selected cold lamination (Cold), the green `Ready' LED lights up as soon as the appliance has been switched on. If you want to cold-laminate when the laminator is hot, turn the temperature switch to `Cold' and wait about half an hour until the appliance has cooled down. Make sure that the document or picture is as close as possible to the sealed edge. The use of a carrier is not required for this laminator. Guide the sealed edge of the laminating pouch into the middle of the insertion slot keeping it as straight as possible. Remove the laminated item from the back of the appliance after lamination. Certain types of paper are not laminated uniformly and seem slightly dull or cloudy. In such cases you can improve the quality of the lamination by putting the laminated document through the laminator a second time. [. . . ] Your appliance comes with a 24-month guarantee. Make sure you keep the sales receipt and original packaging. If you encounter any problems with your appliance, please contact your dealer. [. . . ]