User manual GEM S

[. . . ] EXPLANATION OF GRAPHIC SYMBOLS: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY AND INSTALLATION INSTRUCTIONS INSTRUCTION PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. WARNING - When using electric products, basic precautions should always be followed, including the following: 1. Read all the Safety and Installation instructions and explanations of Graphic Symbols before using the product . [. . . ] The split set window closes. Midi in Source This Source is represented by the MIDI instruments connected to the MIDI IN of the Music Processor (not via MIDI-COMMON). The possible track playing modes The option/command column shows the following two options to choose from. SINGLE The instrument--or computer--connected to the MIDI IN (not MIDI-COMMON) can play only one track. When you select single mode from another mode, only the selected track will remain active. You can scroll the tracks with the TRACK SCROLL BUTTONS (the tracks are selected automatically and are ready to play). MULTI The instrument--or the computer--connected to MIDI IN (not MIDI-COMMON) can play up to sixteen separate tracks, completely independent and not limited by the current keyboard extension. The number of tracks the keyboard will actually play depends (a) on the number of tracks memorised in the Performance, (b) on the number of tracks set to "play" ( ). Track column symbols The status of each track is indicated by the symbols which appear in the track column. The track is in "play" mode, in other words it will play when a messages is received via MIDI IN. To place the track in "mute" mode, select the track (if it has not already been selected) and press the corresponding TRACK SELECT KEY again. X The track is in "mute" mode. To place the track in "play" mode, select the track (if it has not already been selected) and press the TRACK SELECT KEY again. (1) Source 127 ­ The track is disconnected from the MIDI IN Source. For instructions on how to connect the track to Source see. i The track is connected to the GENERATION Destination (internal sound generation). To disconnect the track from this Destination see. e The track is connected to the MIDI OUT Destination. To disconnect the track from this Destination see. EDIT Performance/Tracks on page 1. Note: The MIDI data from the MIDI IN Source can be transmitted to MIDI OUT only if MIDI-MERGE is active (see. General--Midi). Song Source This Source corresponds to the Song in the selected Bank/Song. The possible track playing modes The option/command column shows the following two options to choose from. SINGLE Plays back only one track of the Song. When you select single mode from another mode, only the selected track will remain active. You can scroll the tracks with the TRACK SCROLL BUTTONS (the tracks are selected and are ready to playback). You can also scroll the tracks to check which ones have been recorded). MULTI Plays back all the tracks recorded and activated to play (in other words the tracks in play mode, shown with the symbol ). Track column symbols The status of each track is indicated by the symbols which appear in the track column. [. . . ] Configure the tracks of the Performance correctly for Local Source playing. Check the remainder of the keyboard and adjust the keyboard range if necessary, or set the transposition to the correct value. No sound is heard. It is not possible to format a floppy disk. The floppy disk is protected or damaged. You are using an incorrectly formatted floppy (e. g. 3. 5" DD "work" format). Remove the protection, or use a better quality disk. [. . . ]