User manual GEMINI CDJ-02

[. . . ] SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If the product does not operate normally by following the operating instructions. [. . . ] Do not defeat the safety purpose of the grounding type plug. This state of the art professional CD player is backed by a three year warranty, excluding lasers. Prior to use, we suggest that you carefully read all the instructions. POWER SWITCH: After making sure that the VOLTAGE SELECTOR SLIDE (1), found on the rear panel, is properly set, plug the unit in and press the POWER (5) switch. Pressing the POWER (5) switch a second time will turn the unit off. dISC IN SLOT: The DISC IN SLOT (6) is where the CD is held. When a disc is in the slot the blue LED bar will be illuminated. STOP/EJECT: Press STOP/EJECT (7) once to stop, twice to eject, and hold down to eject the CD. CUE: With the unit in the play mode, and after memorizing the cue point, pressing the CUE (8) button will cause the CD player to enter the pause mode at the memorized cue point. Holding down the cue button changes the cue function to preview (allowing you to hear the music play from the cue point) and releasing the cue button returns you to the preset cue point. If a cue point is not memorized, pressing the CUE (8) button will cause the unit to return to the beginning of that track. : Each press of the PLAY/PAUSE (9) button causes PLAY/PAUSE the operation to change from play to pause or from pause back to play. see the CUE INSTRUCTIONS section for more information. DISPLAY: The DISPLAY (10) shows the track numbers, play mode, pause mode, and 3 different time displays. These time displays are time elapsed on the track, time remaining on the disc and time remaining on the track. PLAYBACK DISPLAY: The PLAYBACK DISPLAY (11) displays the time remaining to play and flashes slowly when the track has 30 seconds left. The PLAYBACK DISPLAY (11) flashes quickly when the track has 15 seconds left. Anti-shock using buffer memory (10-40 seconds) Slot-in mechanism with blue LED "Slot-in" display Single auto cue / continuous play Pitch bend Large blue LCD display 4%, 8% & 16% variable pitch with OFF feature · Digital output Direct access rubber keypad, fully programmable Seamless looping with reloop Frame accurate search Large soft touch rubber jog wheel Time select Do not use this CD player at temperatures below 41°F/5°C or higher than 95°F/35°C. The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vases should be placed on the apparatus. Place the unit in a clean and dry location. Do not place the unit in an unstable location. When disconnecting the power cord from an AC outlet, always grasp it by the plug. [. . . ] If the disc turns but there is no sound, check the cable connections. If they are okay, check your amplifier or receiver. To DIRECTLY SELECT a TRACK, simply press the TRACK NUMBER you want to hear. If you select TRACK NUMBERS 1-9 you may use 0 before the number for, example 01 for track number 1. [. . . ]