User manual GEMINI CFX-30

[. . . ] CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Press B-EDIT (43) when you are satisfied with your exit point and your loop will continue to play until you press LOOP OUT (41). PITCH: Pressing the PITCH (19) buttons enable you to select pitch levels ranging from 4%, 8%, 16%, & 100%. Press the 2 buttons labeled PITCH OFF (4% & 16%) together to turn OFF the PITCH CONTROL SLIDE (21). PITCH BEND: Pushing the PITCH BEND (20) buttons will automatically raise the pitch up to +4% or lower the pitch down to -4% from the existing pitch setting. releasing the PITCH BEND (20) buttons will return the pitch to the original pitch setting. You can use the PITCH BEND (20) to match beats when mixing from one song to another. PITCH CONTROL SLIDE: Moving the PITCH CONTROL SLIDE (21) up or down will lower or raise the pitch percentage up to the selected PITCH (19) setting. You may also key in the specific track you would like to play, in order to instantly scan through the track list to the selected track. DSP EFFECTS: The CFX-30 comes equipped with 8 Digital Signal Processors (DSP) Effects. ECHO, PAN, TRANSFORM, ZOOM, BRAKE, FILTER, REVERSE, and SCRATCH, are all DSP effects that can be futher modified by the DRY/WET (28), START (30), and BRAKE (31) rotary control knobs. see respective functions for more information: 23. ECHO: ECHO (34) is when the original signal is delayed when being input and then fed back into the signal creating the Echo effect. PAN: PAN (35) simply pans the sound from the left and to the right. It will speed up or slow down as you increase or decrease the parameter setting. TRANSFORM: TRANSFORM (37) simply cuts the sound from the left and right stereo levels. It will speed up or slow down as you increase or decrease the parameter setting. ZOOM: Mixing the signal with a slightly delayed copy of itself, where the length of the delay is constantly changed, creates zooming. This resembles the sound of a plane taking off and landing. BRAKE: The BRAKE (38) button simulates the sound of a record stopping/starting on a turntable. The larger or smaller the parameter the longer or shorter it takes for the record to stop. FILTER: The FILTER (32) goes through three passes during parameter adjustment: - Low Pass filters out the other frequencies except the low frequency. With a lower parameter you will hear it more. [. . . ] If the disc turns but there is no sound, check the cable connections. If they are okay, check your amplifier or receiver. Do not assume that the CD player is defective. Many CDs are recorded out of spec and will skip on most or all CD players. [. . . ]