User manual GEMINI GX-200

[. . . ] SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: · If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. [. . . ] The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. lOCATION: The appliance should be installed in a stable location. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. gROUNDING OR POLARIZATION: · If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. ⷠIf this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. Congratulations on your purchase of a Gemini product. Your product is a state of the art unit, backed by a 1 year limited warranty. With proper care and maintenance, your unit will provide years of reliable service. Com or using the included form at the end of this manual. You can also use a SPEAKER STAND by inserting a stand into the STAND MOUNTING SOCKET (3), tighten using the LOCKING PIN (8). Another way to setup the speaker is to use mounting hardware should be used the SPEAKER RIGGING POINTS (2), to hang the speaker where appropriate. speaker stands and mounting hardware are available separately. The RUBBER FEET (4) are for stacking the speakers on top of each other within the STACKING GROOVES (1) located on the top portion of the speaker. GX-200: Professional Passive ABS Molded speaker 100 watts RMS, 250 watts peak power 10" two way loudspeaker Compression driver with titanium diaphragm Aluminum die-cast woofer & high temp voice coil 1/4" Speakon inputs & outputs Auxiliary line output (for bridging) Stand mounting sockets for stage monitoring Full metal grill Rigging points & easy carry handles GX-250: Professional Active ABS Molded speaker Make sure ALL your equipment is completely OFF and lower ALL controls and before connecting the speaker. [. . . ] Use the speakers MASTER (17) level control to adjust the overall level of the SPEAKER, and use the TREBLE (18) & BASS (19) controls level to adjust the TREBLE & BASS levels. If your MIC 1 (9, 10), LINE 1 (11, 12) or if the speakers MASTER (17) level is too loud or distorted the CLIP LED (21) will be light up or flash, adjust your volume to a reasonable level. The GEMINI GX-250 speakers are a dual voltage unit operating at 115 or 230 volts. Place the head of a screwdriver in the center of the VOLTAGE switch found on the rear panel. [. . . ]