User manual GEMINI PL-02

[. . . ] In the USA: If you experience problems with this unit, you experience prob oblems call 1-732-738-9003 for Gemini Customer Service. [. . . ] The PL-01 and PL-02 protect sensitive electronic components with a HF/RF interference filter, which is a high voltage surge and transient suppressor. The fast acting suppression circuit responds quickly, clamping spikes and surges to safe levels. The filter works to prevent noise from electronic motors, florescent lights, and other similar sources from leaking from the AC line into the audio. ⷠIf the unit shorts or overloads, you can reset the unit by pressing the Protection Switch (5). ⷠThe unit has a Master Power Switch (6) with power indicator (on the right side of the unit) for the accessory outlets on the rear panel. The PL-02 has a Voltage Meter (3) which shows the actual voltage between 90V and 250V. cAUTIONS: · Lights do not turn off automatically when the tubes are pushed in, so be sure to turn power off to the lights before pushing the tubes in. ⷠDo not push the tubes in while the caps are off. [. . . ] Allow bulb to cool to prevent burning your fingers. [. . . ]