User manual GEMINI PS-828X

[. . . ] Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. VENTILATION: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. [. . . ] If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. â· If the product has been dropped or damaged in any way. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling. â· When the product exhibits a distinct change in performance, this indicates a need for service. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Congratulations on your purchase of Gemini PS-828X 10" 3 channel stereo mixer. This-state-of-the-art mixer features the latest technological advances and is backed by a 1 year warranty, excluding the cross fader. The cross fader is backed by a separate 90 day warranty. Prior to use we suggest that you carefully read all the instructions. The PS-828X has 2 PHONO (PH/LN) and 5 LINE RCA INPUTS each channel has two corresponding lines and can be chosen via the channel line switches (see 12) When switched to the PH position you may use any Turntable with a magnetic cartridge, remember to connect your ground wire (see GROUNDING SCREW) or there may be a system hum. And when the switch is in the LN position you may connect any line level device as described before (Mp3, CD, Tape etc). 5" 4 Stereo channel mixer - 5 line, 2 Phono 3 Line Level - 3 band rotary line EQ with cut feature & rotary gain channel control - Sperate Cue Switch for each channel - Rotary cue volume, CUE/PGM rotary knob - VU meter on each channel - Talkover switch - Removable face plate for user replaceable Rail Glide cross fader Now you may plug the RCA's from your playable medium into each input to be connected to their respective CHANNELS (CH). [. . . ] CHANNEL ROTARY GAIN The CHANNEL ROTARY GAIN allows you to boost the signal of each individual channel depending on how low or high its input level is 3 BAND EQUALIZER The 3 BAND EQUALIZER adjust the tone of each CHANNEL by giving you a choice 3 frequencies (BANDS) to adjust , from LOW, MIDRANGE (MID) and HIGH's , you can use the adjustment knobs to higher or lower the 3 separate frequencies till the sound of the music program is appropriate for your listening environment. CHANNEL VOLUME FADER After you have chosen which input you will use with the INPUT SELECTOR the corresponding CHANNEL FADER will allow you to adjust the volume for that particular CHANNEL. CROSSFADER ASSIGNMENT/ADJUSTMENT SWITCHES The fader assignment push button allows you to assign which two channel faders will be controlled by the CROSSFADER in the UP position the CROSSFADER will fade between channels (1) and (2), in the down or pushed in position the CROSSFADER will fade between channels (3) and (4). The CURVE ADJUSTMENT selector lets you choose between two fader CURVE settings, positioning the switch to the left will give you a gradual CROSSFADE and positioning the switch to the right will give you a quick CROSSFADE. [. . . ]