User manual GEMINI TT-03

[. . . ] ATTACHMENTS: Do not use attachments not recommended by the product manuacturer as they may cause hazards. WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. [. . . ] SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: · If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. ⷠIf the product has been dropped or damaged in any way. ⷠWhen the product exhibits a distinct change in performance, this indicates a need for service. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Prior to use, we suggest that you carefully read all the instructions. Rotate the PLATTER (2) until the VOLTAGE SELECTION SWITCH (3) (located on the TURNTABLE BASE (1)) is visible through one of the platter holes. Make sure that the VOLTAGE SELECTOR SWITCH (3) is set to the correct voltage. 2 kg) direct drive turntable - +/-10% variable pitch slide control - Solid aluminum platter with easy glide grooves - Straight tone arm for superior tracking - Tone arm height adjustment up to 6 mm with lock - Fully adjustable counter weight & anti-skating controls - LED illuminated soft touch start/stop & RPM buttons - 33/45/78 RPM - Push button quartz lock w/ LED - RCA connector for Target light (optional) - Removable head shell - Felt slip mat included - Detachable RCA & ground cables Set the TURNTABLE BASE (1) on a flat, level surface free of vibration. Use the turntable feet to stabilize the unit horizontally. Try to place the unit as far away from the speakers as possible. Keep the unit away from direct exposure to the sun, heat, moisture or dirt. Read all operating instructions before using this equipment. The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vases should be placed on the apparatus. Please contact the Gemini Service Department or your authorized dealer to speak to a qualified service technician. Because all cartridges have their own designs, please refer to your particular cartridge's instructions to insure proper installation. [. . . ] You now have the option of turning off the power by turning the POWER (13) switch to the "OFF" position, or stopping the PLATTER (2) by pushing the START/STOP (15) button. Pushing the START/STOP (15) button will cause the record to stop exactly when the START/STOP (15) button is pressed while playing. Press the START/STOP (15) button again to start playback with a short delay effect. When the PITCH SLIDE CONTROL (17) is in the center position, the speed will be 33, 45, or 78 depending on which SPEED SELECTOR (16) button is pushed. [. . . ]