User manual GEMINI UX-16

[. . . ] SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: · If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. [. . . ] If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. ⷠIf this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. Congratulations on your purchase of a GEMINI wireless system. This state of the art unit includes all the latest features backed by a three year limited warranty. Prior to use, we suggest that you carefully read the instructions. (4) ANTENNA: Fixed-length UHF antenna permanently mounted either on the front or on rear panel. (5) UNBALANCED OUTPUT: Unbalanced 1/4" mono jack audio output provides unbalanced low-impedance output (6) SQUELCH ADJ. : The squelch adjusts the output level to prevent from the external noise. UX-16 M includes UX-16 receiver & XM-16 handheld microphone UX-16 H includes UX-16 receiver, XB-16 body pack transmitter & HSM-1 headset UX-16 L includes UX-16 Receiver, XB-16 body pack transmitter & LAV-1 lavalier 16 band UHF synthesizer controlled frequencies Phase locked loop (PLL) circuitry Super high sensitivity with extremely low noise transmission & reception Stable & quality SMT assembled PCB module XM-16 has a uni-directional dynamic microphone HSM-1 has an electret condenser unit microphone LAV-1 has an electret condenser unit microphone All operating instructions should be read before using this equipment. To reduce the risk of electrical shock, do not open the unit. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. Dust, dirt and debris can interfere with the performance of this unit. Make an effort to keep the unit away from dusty, dirty environments, and cover the unit when it is not in use. Dust it regularly with a soft, clean brush. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 5V x 2 AA size batteries for low operating cost. Switching the power to "ON", the LED flashing once indicates that the transmitter has sufficient power. If the LED stays on, it indicates that the battery has insufficient power and should be changed soon. [. . . ] Check whether transmitter is too far away from receiver or SQUELCH control set too high. Check whether receiver is located too near metal object or there are obstructions between transmitter and receiver. Using the wrong AC adapter may cause irreparable damage to the unit. Then plug the AC adapter into a power outlet. [. . . ]