User manual GEMINI XTR-400

[. . . ] fUSE (4): replace with proper type and rating. AC INLET (6) is used to attach the power cord to the unit. The unit has two channels for stereo operation. each channel provides a separate signal at the speaker outputs. [. . . ] Now create a link by connecting the remaining Channel 1 input to a Channel 2 input (1 or 2) using a standard balanced cable (may be purchased separately). You can adjust the level of each satellite speaker using it's channel's SENSITIVITY/VOLUME CONTROL (10). There are two parallel input connectors (one female XLR and one 1/4" jack) per channel. Either can be used as an input or as a link to chain amplifiers. 1/4" PHONO INPUT JACKS: 1/4" PHONO INPUT JACKS (2) accept a balanced as well as an unbalanced line. It will always maintain a perfect balance to give you incredible sound quality!SIGNAL GROUND LIFT SWITCH: SIGNAL GROUND LIFT SWITCH (7) is used to lift the balanced input connectors' ground/shield from the amplifier's ground. When the signal ground lifted, the sound source disconnects from the amplifier's ground preventing ground loops which can generate hum and noise. Depending on how your sound system is hooked up, sometimes applying the ground will create a quieter signal path. Sometimes lifting the ground can eliminate ground loops and that annoying hum to give you quieter and cleaner overall sound. With the power amp ON, listen to the system in idle mode (no music or signal) with the ground ON. Turn the power OFF before moving the SIGNAL GROUND LIFT SWITCH (7). Now lift the ground by moving the SIGNAL GROUND LIFT SWITCH (7) to the right. Turn the power back ON and listen to determine which position makes the overall sound quieter with the least amount of noise and hum. There are various ways to set up this system: 15" woofer Features: Efficient band-pass cabinet design Large metal handles Metal protection corners Four 2" wheels Amplifier assembly on the back 35mm standmount cap on top Black carpet finish Rubber feet Dimensions:. 10" woofer 6" dual piezo horn Features: Trapezoidal cabinet Full front protective metal grill Metal protection corners 35 mm standmount cup on the bottom Black carpet finish Rubber feet Neutrik Speakon connector Dimensions:. Okay, this is your basic setup, perfect for small parties and venues. The ideal location for your subwoofer is close to a wall or in a corner. This will give you the fullest bass response. Your 2 satellite speakers can be placed up on stands on each side (stands must be purchased separately). This will give you a total of 800 watts rms!Place a subwoofer on each side to the left and right. [. . . ] SPEAKER OUTPUTS (3): The speaker output connectors are SpeakonTM connectors that will accept cables with SpeakonTM connectors. (These cables must be purchased separately) The subwoofer is already connected internally, so you don't have to worry about connecting it to the amplifier. 10" Woofer 6" dual piezo horn Dispositifs: Coffret trapézoïdal Full front protective metal grill Coins de protection en métal 35 mm standmount cup on the bottom Finition noire de tapis Pieds en caoutchouc Connecteur de Neutrik Speakon Dimensions:. In the USA: If you experience problems with this unit, call 1-732-738-9003 for Gemini Customer Service. [. . . ]