User manual GENI ELECTRONICS STROBE CONTROLLER FL-01CX

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GENI ELECTRONICS STROBE CONTROLLER FL-01CX. We hope that this GENI ELECTRONICS STROBE CONTROLLER FL-01CX user guide will be useful to you.

Lastmanuals help download the user guide GENI ELECTRONICS STROBE CONTROLLER FL-01CX.

Mode d'emploi GENI ELECTRONICS STROBE CONTROLLER FL-01CX

Download

Manual abstract: user guide GENI ELECTRONICS STROBE CONTROLLER FL-01CX

Detailed instructions for use are in the User's Guide.

 [. . . ] Strobe controller FL-01CX

Compact reliable strobe controller can remotely control the flash rate of 1 to 4 strobes.  [. . . ] Unpack unit From carton and inspect for damage. if unit is damaged please contact your Geni dealer immediately!Connect controller to strobe ( the FL-075 or FL-1800. . . . . ) with a signal cable made of two standard 1 /4" mono jacks with proper cable. Plug power cord into properly grounded socket. -Check that the voltage marked on the back of unit is correct for your area. While the button of POWER ON/OFF is ON ,  the upper red LED is lit which indicates the power of controller starts for operating. While the button of AUTO/MANU is ON ,  the upper red LED is lit which indicates the timer of automatic flash starts; the interval of time could be adjusted by RATE knob,  and the interval of time could be from 0. 1second to 2 seconds. When it trigged the flash once,  the green LED also flashes once.  [. . . ] Tip or 1 /4" jack is positive signal,  base negative

Maintenance
No user serviceable parts,  refer servicing to a qualified service technician. 

Speed Control

Specifications

Power Switch Auto/Manu

Trigger

Number of strobe: 8 unit maximum Output signal: 10~12VDC Voltage: Refer detail the back of unit Fuse: Internal (0. 5A/250V) Dimensions: 120x65x35mm (LxWxH) Weight: 353g.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GENI ELECTRONICS STROBE CONTROLLER FL-01CX

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GENI ELECTRONICS STROBE CONTROLLER FL-01CX will begin.