User manual GENIUS 501

[. . . ] Load 2 x AA batteries into the battery chamber, following the polarity indications. Close the battery chamber cover. X 1. 2 100 5M 15 14 13 12 Positive + - Negative 11 10 9 2. 2 Inserting Memory Card 1. Power off the camera. 2. Open the card slot cover, and insert the card in the card slot. 3. Insert the memory card into the card slot and press it down until a click sound happens 4. Close the card slot cover. 1 Battery Status ( )Battery Full ( )Battery Half Drained ( )Battery Drained 2 Working Mode ( )Image Shooting Mode ( )Playback Mode ( )Movie Clip Mode ( )Voice Recording Mode 3 ( ) WARNING: Holding Camera Stable 4 Flash Mode ( )Auto Flash ( )Fill-in Flash ( )Flash Off 5 Self-timer ( )10 Seconds ( ) 2 Seconds 2S 7 Focus Range ( ) Macro 8 Shooting Continuous ( Single 9 13 Quality ( )S. [. . . ] Press the Right or Left Button to go to or back to the next or last image. Operation Steps 1. or ) shows up Note: The icon ( when viewing still image comes with a voice memo. Video White Balance Setting (Default:AUTO) Still Image Mode & Movie Mode W. Balance Auto Daylight Cloudy Tungsten Fluorescent Back Set : OK Operation Steps 1. OK The White Balance options are provided as follows: Auto Daylight Cloudy Tungsten Adjusting the white balance automatically Under the strong light environment Under the cloudy light environment Under the tungsten light environment Playback of Movie Clip 100-0021 Press Playback Button to play the movie clips. 150mm+-2 Fluorescent Under the fluorescent light environment Press the Up Button to play or pause the movie clip. Note:The icon ( ) on the left of the LCD Monitor represents a Movie clip, not a still image. Operation Steps 1. or 3. 2 Under Voice Recording Mode( ) Operation Steps 1. OK Thumbnail Display(Small Images) 00:53:13 STANDBY START : SH 00 : 00 : 00 100-0021 100-0002 This function allows you to record sound as a tape recorder once the shutter button is pressed down. The length of the recording time depends on the available memory capacity. Note: You can connect camera with other audio player or PC by USB cable to play and check the voice recording file. Thumbnail Display is a convenient tool for you to find the image you took from the list. You can press WIDE Button to have Thumbnail Display. 7 8 105mm+-2 105mm+-2 Exploring an Image Copy to Card Copy To Card Cancel Execute Operation Steps 1. OK This function allows you to put all images stored in the internal memory into the memory card. 100-0021 100-0021 X 1. 6 100-0021 X 1. 6 Back Set : OK 1. Press down the TELE Button and you can see the enlargement of the image. Use the TELE/WIDE Button to zoom in or to zoom out. Use the UP/DOWN/LEFT/RIGHT Button to locate the position you would like to review. Press down the WIDE Button to return to the original Playback Mode. DPOF-STANDARD DPOF SINGLE ALL Operation Steps 1. 4. OK Print Enable Cancel Execute Operation Steps 1. or 2. OK Single Print Nun Print 0 Operation Steps 1. or 2. OK Back Set : OK Back Set : OK Back Set : OK 150mm+-2 Setting Image Protection Protect Single All Select Back Set : OK Operation Steps 1. OK This function allows you to prevent your specific images from being deleted if the "LOCK" under "PROTECT" list is selected. Conversely, you can select " C ancel" to cancel the protection. This option allows you to put the print quantity (MAX. [SINGLE] - specifies the number of copies for a selected image and you can press LEFT/RIGHT Button to go to next image. [ALL] - specifies the number of copies for all pictures apart from movie clips and voice recording files. Note: You cannot see the "PRINT" function on the LTPS LCD Monitor if a memory card is not inserted. 3. 4 Under Movie Clip Mode( Deleting all Image Delete Single All Select Back Set : OK Operation Steps 1. OK ) Video Size Setting The video size options are provided as follows: VGA / QVGA Menu You can delete selected images and all images once with this function. Size W. Balance Setup VGA QVGA Back VGA Auto Next Menu Operation Steps 1. OK Set : OK 9 10 105mm+-2 3. 5 SETUP Settings Setup Auto Language Format Date Input Imprint Back 3. Min. [. . . ] A screen where you can set the number of copies to print will appear as shown above. 2. Press the Up/Down Button to select the number of prints. 3. Use the Left/Right Button to select another picture and select the number of prints for another picture. 4. After setting the number of prints, press the OK Button to save. [. . . ]