User manual GENIUS TVGO DVB-T33

[. . . ] Connect the SVHS output device to "S-VIDEO IN". Connect the DVD Player or Video Recorder's video output to "VIDEO IN". Connect the video tape recorder's audio output to the "AUDIO IN". Caution: Please take special care on the Remote sensor cable, don't plug in or remove the sensor cable while the PC system is in Power on state. Otherwise, it may cause TVGo A11 hardware failure. 2. 2 PC BIOS Setting Power on the computer and system will start POST (Power On Self Test) process. [. . . ] Select "CD-ROM driver" and click "Next" button to search driver. 7. Click "Yes" to continue the installation. 8. Click "Finish" button to finish the installation. 5 English 9. The system will detect one "Unknown" device. 10. Please click "Next" to continue. 11. Select the first option "Search for the best driver for your device (Recommended)", and click "Next" to continue. 12. Select the option "CD-ROM device" and click "Next" to continue. 6 English 13. Click "Next" button to copy the driver. 14. Click "Yes" to continue install the "TVGo A11 WDM TV Tuner " driver. 15. Click "Finish" to complete the installation. 16. Check your driver from Device Manager after installation. 7 English 2. 4 Install DirectX Microsoft DirectX allows 3D hardware acceleration support in Windows 98, ME, 2000, and Windows XP. The "Auto" scan mode is not by TV table order. 12 English 3. 2 Watch TV or VCR 8. Double click to full screen 2. TV wall display 5. Source Switch 3. Channel List 1. Help 4. Channel Control 6. Volume Control 7. Search TV Channel 1. TV wall display: show 4x4 TV programs on screen. Channel List: This is listing all available TV channel. Channel control: Set channel up or down 5. Source Switch: click it to select TV, Video In or S-Video In 6. Volume control: Adjust the Volume or mute. Search TV channel: click to search available TV channel. Double click to full screen display. 13 English 3. 3 Record Video Click the "Setting" button to setup the record format. Setup the video format. Click "Record" button to start to capture video. 3. 4 Snapshot Image Click the "Setting" button to setup the image format. TVGo A11 supports BMP and JPEG image format. Please choose your desired format. 14 English Click `Snapshot' button to capture image 3. 5 Playback Video Click "Play List" button to select video file. Choose the video then click "open" button. Movie Player function List: 1 About: Shows the current version info, 2 Exit: To exit the video playback window, [Esc] or [ALT]+[F4] on keyboard. [. . . ] First time, please click "Search" button to scan available radio programs on the radio. Also you can select some radio programs then click "Use Favorite Channel list" button to set the favorite channel. 17 English Chapter 4: Using the Remote Control The Remote control allows you to operate TVGo A-11, such as turning your TV on/off, viewing the TV, and changing the channels and volume. Aim the front of the Remote Control at the Remote Control Receiver and press the control buttons as you would on the infrared ray receiver. 4. 1 Installing Batteries Open the back cover of the remote controller and put in two AAA batteries (alkaline battery recommended). 4. 2 Remote controller functions 1. Mute: click to mute, click again to restore. [. . . ]