User manual GENUIS V1010

[. . . ] English WEEE Warning Message Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. For more information, contact the retailer or the local authorities in charge of waste management. FCC STATEMENT This device complies with Part 15 of the FCC Rules. [. . . ] This mode is set when: · There is no face detected · The focus distance is within the macro range. This mode can only be detected when you half press the shutter button. This mode is set when the EV setting greater than 2. 5. Landscape Sunset Macro Backlight Backlight Portrait This mode is set when a face is detected with an EV setting greater than 2. 5. 39 Icon Intelligent Scene Modes Description This mode is set when: · There is no face detected. · The focus distance is more than 1. 5 meters. · The EV setting is lower than 5 or 4. 5. This mode is set when a face is detected with an EV setting lower than 5 or 4. 5. Night Scene Night Portrait 40 Using Blink Detection Mode The Blink Detection mode tracks faces and determines captured image that contain subjects with blinked eyes. After shooting, when the camera detects that the subject blinked an eye, a menu selection appears to ask the user whether to save the image or not. This feature saves time in managing photos to be stored or deleted from the memory. To activate Blink Detection 1. Select from the Scene Mode submenu. 307 10M Detected faces are framed. Half press the shutter button to focus the subject. The frame turns green to indicate focus is set. Press the shutter button to capture the image. The image is automatically saved unless the camera detects that the subject blinked an eye. In this case, the screen on the right is displayed: 4. Select Save Image to save or Cancel to disregard. Save image Cancel 41 Using Aperture Priority Mode With Aperture Priority mode, users can adjust the aperture value and the camera automatically sets the shutter speed to match the brightness. To activate Aperture Priority 1. Select from the Scene Mode submenu. 307 10M 2. Press SET button to enter the adjust mode. or keys to select the aperture value 4. Press the shutter button to capture the image. F 3. 0 SET : Adjust Displays the aperture value Using Shutter Priority Mode With Shutter Priority mode, users can adjust the shutter speed and the camera automatically sets the aperture value to match the brightness. To activate Shutter Priority 1. Press SET button to enter the adjust mode. or keys to select the shutter speed 307 4. Press the shutter button to capture the image. SET : Adjust 1/ 30 Displays the shutter speed value 42 Using Manual Exposure Mode With Manual Exposure mode, users can manually adjust the shutter speed and the aperture value. To activate Manual Exposure 1. [. . . ] Folder names begin with a 3-digit number from 100 to 999 and followed by "DICAM" or "_AUCT" or "_UTUBE". If new files are saved, a new folder named in sequence will be automatically created. File Naming File names begin with "DSCI" and followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created. If the highest folder number is 999 and the highest file number exceeds 9999, the camera will display the warning message "Folder cannot be created. " When this happens, try one of the following ways: · Reset the file number. [. . . ]