User manual GENUIS V3

[. . . ] English WEEE Warning Message Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. For more information, contact the retailer or the local authorities in charge of waste management. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1). [. . . ] Press the MENU button to exit from the menu. -20- English An [ ] icon is displayed on the screen. Compose the image, press the shutter button down halfway, then press it down fully. [VOICE RECORDING] is displayed on the screen immediately, and the voice memo recording starts. Press the shutter button one more time during recording, or wait for 30 seconds [VOICE RECORD END] will be displayed and the recording will end. An [ ] icon is displayed with images that have been recorded with a voice memo. NOTE Voice memo is only available in [Single] capture mode. VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. The recording of the video clip will start. Pressing the shutter button one more time will end the recording of the video clip. The recording time depends on the storage size and the subject of the image to be recorded. The zoom function cannot be used during video recording. NOTE When recording a video clip, the flash cannot be used. If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in the currently selected quality, a warning icon [ ] will appear, and then the video recording will stop. In this case, select a video quality lower than the current one. -21- English Playing Back Video Clips You can play back recorded video clips on the camera. You can also play back sound if recorded with the video. Select the desired video clip with the / buttons. A press of the / buttons during playback allows fast forward play / fast reverse play. To stop video playback, press the button. This stops playback and returns to the start of the video clip. To pause video playback, press the SET button. To cancel pause, press the SET button again. NOTE Video clips cannot be displayed rotated or enlarged. You are recommended to use Windows Media Player or QuickTime Player to play the video clip back on your computer. QuickTime Player is a free media player available at www. apple. com; and compatible with Mac and Windows-computers. For more information about the operation of the media player, refer to its respective help documentation. -22- English PLAYBACK MODE Playing Back Still Images You can play back the still images on an LCD monitor. The images can be displayed in forward or reverse sequence with the / buttons. [. . . ] The free space on the hard disk in your computer may be insufficient. Check whether the hard disk has a space for running Windows, and if the drive for loading image files has a capacity at least that of the memory card inserted in the camera. No power supply. Use an AC power adapter. Recharge the batter -44- English Connecting to a PictBridge Compliant Printer If a printer that supports PictBridge is available, images can be printed by connecting the digital still camera directly to the PictBridge-compatible printer without using a computer. Connecting the camera to the printer 1. Connect one end of the USB cable to your camera. [. . . ]