User manual GERICOM OVERDOSE P4

[. . . ] Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes. [. . . ] Click Next and select "Search for the best driver for your device. Make sure you have not selected any locations to search, then click Next > Next > Finish. Select Yes to restart the computer when prompted. 4 What To Have Ready In some cases when drivers are to be installed you will need to have present your OS CD Windows 98 Second Edition. If prompted you may swap your Device Drivers & Utilities + User's Manual CD-ROM with your OS CD-ROM and back again when required. Windows 98 Second Edition 4 - 5 Drivers & Utilities Audio (Win98SE) 1. Navigate (Browse. . ) to D:\Drivers\AUDIO\Setup. exe and click OK. Click Finish to restart Windows when the InstallShield Wizard Complete box appears. Windows will then tell you "New Hardware Found" and begin to install the drivers for you. When you are prompted `Please insert the disk labeled "Windows 98 Second Edition CD-ROM" and then click OK' eject the CD-ROM in your drive and insert the Windows CD. Give the computer a few seconds to recognize that the disk is in the drive, then click OK (click Yes if asked if you want to continue at any time). You will see the Volume Control appear in the taskbar alongside the date after you restart the computer. Modem (Win98SE) 1. Click Start (menu), point to Settings and click Control Panel. Double-click System (icon) and then click Device Manager. Click "+" next to Other devices (if its sub-items are not shown). Double-click PCI Card and click Reinstall Driver (button). When the Update Device Driver Wizard appears, click Next > Next - make sure that you have selected "Search for a better driver than the one your device is using now (Recommended)". Select ONLY "Specify a location:" (make sure the other boxes do not have a tick inside them) and navigate (Browse. . . ) to D:\Drivers\Modem\win98se and click OK > Next > Next. After the updated driver is installed, click Finish. 4 4 - 6 Windows 98 Second Edition Drivers & Utilities 7. Close the Smart Link 56K Voice Modem Properties and System Properties (dialog box). The modem is ready for dial-up configuration. LAN (Win98SE) 1. Click Start (menu), point to Settings and click Control Panel. Double-click System (icon) and then click Device Manager (tab). Click "+" next to Other devices (if its sub-items are not shown). [. . . ] PnP - see Plug and Play POST (Power On Self Test) - A series of built-in diagnostics that are performed when the computer is booted. G-8 R RAM (Random Access Memory) - The memory available to programs, different programs will need more or less RAM depending on what they are doing. RAM is the most common type of memory found in computers. resume - To restart your computer from suspend mode. ROM (Read Only Memory) - A memory chip that permanently stores instructions and data. [. . . ]