User manual GIGABYTE 8I845GVM-RZAC

[. . . ] The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Mother Board 8I845GVM-RZAC Motherboard 8I845GVM-RZAC Oct. 15, 2004 Preparing Your Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. Unplug your computer when working on the inside. [. . . ] The four options are: CHS/LBA/Large/Auto (Default:Auto) Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information. Capacity Capacity of currently installed hard disk. Cylinder Number of cylinders Head Number of heads Precomp Write precomp Landing Zone Landing zone Sector Number of sectors - 23 - BIOS Setup English Drive A / Drive B The category identifies the types of floppy disk (drive A and drive B) installed in the computer. None No floppy disk is installed 360K, 5. 25" 5. 25 inch PC-type standard drive; 360K byte capacity. 1. 2M, 5. 25" 5. 25 inch AT-type high-density drive; 1. 2M byte capacity (3. 5 inch when 3 M ode is Enabled). 720K, 3. 5" 3. 5 inch double-sided drive; 720K byte capacity 1. 44M, 3. 5" 3. 5 inch double-sided drive; 1. 44M byte capacity. 2. 88M, 3. 5" 3. 5 inch double-sided drive; 2. 88M byte capacity. Floppy 3 Mode Support (for Japan Area) Disabled Drive A Drive B Both Normal Floppy Drive. (Default value) Enable Drive A 3 Mode support. Enable both Drive A and B 3 M ode support. Halt on The category determines whether the computer will stop if an error is detected during power up. All Errors Whenever the BIOS detects a non-fatal error the system will stop. 128MB Set Graphics Aperture Size to 128MB. (Default value) Disabled Disable this function. Graphics Share Memory This option is available only when you use the onboard VGA function. (Default value) 1MB Set Graphics Share Memory to 1M B. 8I845GVM-RZAC Series Motherboard - 26 - Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals On-Chip Primary PCI IDE On-Chip Secondary PCI IDE IDE1 Conductor Cable IDE2 Conductor Cable USB Controller USB Keyboard Support USB Mouse Support AC97 Audio Onboard H/W LAN Onboard LAN Boot ROM * Onboard Serial Port 1 Onboard Serial Port 2 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA Game Port Address Midi Port Address x Midi Port IRQ * English [Enabled] [Enabled] [Auto] [Auto] [Enabled] [Disabled] [Disabled] [Auto] [Enabled] [Disabled] [3F8/IRQ4] [2F8/IRQ3] [378/IRQ7] [SPP] 3 [201] [Disabled] 10 Item Help Menu Level u If a hard disk controller card is used, set at Disabled [Enabled] Enable onboard IDE PORT [Disabled] Disable onboard IDE PORT higf : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults On-Chip Primary PCI IDE Enabled Disabled Enable onboard 1st channel IDE port. (Default value) Disable onboard 1st channel IDE port. On-Chip Secondary PCI IDE Enabled Disabled Auto ATA66/100 ATA33 Enable onboard 2nd channel IDE port. (Default value) Disable onboard 2nd channel IDE port. (Default Value) Set IDE1 Conductor Cable to ATA66/100 (80-pin). Please make sure your IDE device and cable is compatible with ATA66/100. Set IDE1 Conductor Cable to ATA33 (40-pin). Please m ake sure your IDE device and cable is compatible with ATA33. (Default Value) Set IDE2 Conductor Cable to ATA66/100 (80-pin). Please make sure your IDE device and cable is compatible with ATA66/100. [. . . ] Support : http://tw. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support (Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address (English): http://www. gigabyte. com. tw WEB address (Chinese): http://chinese. giga-byte. com -- U. S. A. Address: 17358 Railroad St, City of Industry, CA 91748. TEL: +1 (626) 854-9338 FAX: +1 (626) 854-9339 Tech. [. . . ]