User manual GIGABYTE 8VM533M-RZ

[. . . ] Intel® Pentium® 4 Processor Motherboard 8VM533M-RZ / 8VM533M-RZ-C User's Manual Rev. 1003 12ME-VM533MRZ-1003 Copyright © 2004GIGABYTE TECHNOLOGYCO. , LTD Copyright by GIGA-BYTETECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the property of their respective owners. Notice Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] No Errors The sy stem boot w ill not s top for any error that may be detected and y ou w ill be prompted. All Errors Whenev er the BIOS detects a non-fatal error the s y stem w ill be stopped. All, But Key board The s y stem boot w ill not stop for a key board error; it w ill stop for all other errors . (Default v alue) All, But Disk ette The sy stem boot w ill not stop for a disk error; it w ill stop for all other errors. All, But Disk /Key The sy stem boot w ill not stop for a key board or disk error; it w ill stop for all other errors. Memory The c ategory is display -only w hich is determined by POST (Pow er On Self Test) of the BIOS. Base Memory The POST of the BIOS w ill determine the amount of base (or conv entional) memory ins talled in the sy stem. The v alue of the base memory is ty pic ally 512K for sy stems w ith 512K memory installed on the motherboard, or 640K for sy stems w ith 640K or more memory installed on the motherboard. Extended Memory The BIOS determines how much ex tended memory is present during the POST. This is the am ount of memory located abov e 1 MB in the CPU 's memory address map. 8VM533M-RZ Series Motherboard - 22 - Advanced BIOS Features CMOS Setup Ut ility-Co pyright (C) 1984 -2003 Aw ard Soft ware Adva nced BI OS Feat ures Firs t Boot D evice Seco nd Boot D evice Thir d Boot D evice Pas sword C heck CPU H yper-Threa ding [Flo ppy] [HDD -0] [CDR OM] [Set up] [Enab led] Item Help Menu L evel} Selec t Boot D evice prio rity [Flo ppy] Boot from fl oppy [LS1 20] Boot from L S120 [HDD -0] Boot from Firs t HDD [HDD -1] Boot from Secon d HDD higf: M ove Enter: Select F5: P revious V alues +/-/ PU/PD: V alue F10: Save F6: Fa il-Safe De fault ESC: Exit F1: General Help F7: Optimiz ed Defa ults English # " # " Sy stem w ill detect automatic ally and s how up w hen y ou ins tall the Intel® Pentium ® 4 proc essor w ith HT Technology. First / Second / Third Boot Device Floppy LS120 HDD-0~3 SCSI CDROM ZIP USB-FDD USB-ZIP USB-C DROM USB-HDD LAN Disabled Sy s tem Setup Selec t y our boot dev ic e priority Selec t y our boot dev ice priority Selec t y our boot dev ic e priority Select y our boot dev ice priority Selec t y our boot dev ice priority Selec t y our boot dev ice priority Selec t y our boot dev ic e priority Selec t y our boot dev ic e priority Selec t y our boot dev ice priority Selec t y our boot dev ic e priority Selec t y our boot dev ice priority Selec t y our boot dev ice priority by by by by by by by by by by by by Floppy . Disabled. Password Check The sy stem can not boot and can not acc ess to Setup page w ill be denied if the correct passw ord is not entered at the prompt. The sy stem w ill boot, but access to Setup w ill be denied if the correct passw ord is not entered at the prompt. (Default v alue) Enables CPU Hy per Threading Feature. Please note that this feature is only w orking for operating sy stem w ith multi processors mode supported. (Default value) Disables CPU Hy per Threading. CPU Hyper-Threading Enabled Disabled - 23 - BIOS Setup English Integrated Peripherals CMOS Setup Ut ility-Co pyright (C) 1984 -2003 Aw ard Soft ware Inte grated Periphe rals OnChi p IDE Cha nnel0 OnChi p IDE Cha nnel1 AC97 Audio VIA o nboard L AN * USB 1 . 1 Contr oller USB 2 . 0 Contr oller USB K eyboard Su pport USB M ouse Sup port Onboar d Serial P ort 1 Onboar d Serial P ort 2 Onboar d Parallel Port Paral lel Port Mode [Enab led] [Enab led] [Au to] [Enab led] [Enab led] [Enab led] [Disa bled] [Disa bled] [3F8/ IRQ4] [2F8/ IRQ3] [378/ IRQ7] [SPP] Item Help Menu L evel} [Au to] Auto -detect IDE cable type [ATA 66/100/ 133] Set C onductor cable to AT A66/100/1 33(80 -pi ns) [ATA 33] Set C onductor cable to AT A33(40-p ins) higf: M ove Enter: Select F5: P revious V alues +/-/ PU/PD: V alue F10: Save F6: Fa il-Safe De fault ESC: Exit F1: General Help F7: Optimiz ed Defa ults OnChi p IDE Channel0 When enabled, allow s y ou to use the onboard primary PCI IDE. If a hard disk controller card is used, set at Dis abled. Enabled Enable onboard 1st channel IDE port. (Default v alue) Disabled Disable onboard 1st channel IDE port. OnChi p IDE Channel1 When enabled, allow s y ou to use the onboard secondary PCI IDE. If a hard disk controller card is used, set at Dis abled. Enabled Enable onboard 2nd channel IDE port. (Default v alue) Disabled Disable onboard 2nd channel IDE port. AC97 Audio Auto Disabled Enable Disable Enable onboard AC'97 audio function. Enable onboard LAN function. (Default v alue) Disable onboard LAN func tion. VIA onboard LAN * USB 1. 1 Controller Disable this option if y ou are not using the onboard USB feature. 1 Controller. USB 2. 0 Controller Disable this option if y ou are not using the onboard U SB 2. 0 feature. (Default v alue) Disabled Disable USB 2. 0 Controller. "*" For 8VM533M-RZ only. 8VM533M-RZ Series Motherboard - 24 - USB Keyboard Support Enabled Disabled Enabled Disabled Auto 3F8/ IRQ4 2F8/ IRQ3 3E8/ IRQ4 2E8/ IRQ3 Disabled Auto 3F8/ IRQ4 2F8/ IRQ3 3E8/ IRQ4 2E8/ IRQ3 Disabled 378/ IRQ7 278/ IRQ5 Disabled 3BC/ IRQ7 SPP EPP ECP ECP+EPP Enable USB key board support. [. . . ] Support : http://www. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support (Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address : http://www. giga-byte. com -- Germany G. B. T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm 112 22047 Hamburg TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech. ) FAX: +49-40-25492343 (Sales) +49-1803-428329 (Tech. ) Tech. Support : http://de. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. [. . . ]