User manual GIGABYTE 8VT800-RZ

[. . . ] Intel® Pentium® 4 Processor Motherboard 8VT800-RZ / 8VT800-RZ-C User's Manual Rev. 1002 12ME-8VT800RZ-1002 Copyright © 2004GIGABYTE TECHNOLOGYCO. , LTD Copyright by GIGA-BYTETECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the property of their respective owners. Notice Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] Select your boot device priority by HDD-0~3. Select your boot device priority by SCSI. Select your boot device priority by CDROM. Select your boot device priority by ZIP. Select your boot device priority by USB-FDD. Select your boot device priority by USB-ZIP. Select your boot device priority by USB-CDROM. Select your boot device priority by USB-HDD. Select your boot device priority by LAN. Select your boot device priority by Disabled. The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt. (Default value) Enables CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. (Default value) Disables CPU Hyper Threading. Password Check CPU Hyper-Threading Enabled Disabled - 25 - BIOS Setup English Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals OnChip IDE Channel0 OnChip IDE Channel1 AC97 Audio VIA onboard LAN * USB 1. 1 Controller USB 2. 0 Controller USB Keyboard Support USB Mouse Support Onboard LAN Boot ROM * Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select xUR2 Duplex Mode Onboard Parallel Port Parallel Port Mode Game Port Address Midi Port Address Midi Port IRQ higf: Move Enter: Select F5: Previous Values [Enabled] [Enabled] [Auto] [Enabled] [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] [3F8/IRQ4] [2F8/IRQ3] [Normal] Half [378/IRQ7] [SPP] [201] [Disabled] 10 +/-/PU/PD: Value F10: Save F6: Fail-Save Default Item Help Menu Level} [Auto] Auto-detect IDE cable type [ATA66/100/133] Set Conductor cable to ATA66/100/133(80 -pins) [ATA33] Set Conductor cable to ATA33(40-pins) ESC: Exit F1: General Help F7: Optimized Defaults OnChip IDE Channel0 When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is used, set at Disabled. Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. OnChip IDE Channel1 When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is used, set at Disabled. Enabled Enable onboard 2nd channel IDE port. (Default value) Disabled Disable onboard 2nd channel IDE port. AC97 Audio Auto Disabled Enable Disable Enable onboard AC'97 audio function. Enable onboard LAN function. (Default value) Disable onboard LAN function. VIA onboard LAN * USB 1. 1 Controller Disable this option if you are not using the onboard USB feature. [. . . ] The will execute the installation for you by itself. We recommend that you install all components in the list. Massage: Some device drivers will restart your system automatically. After restarting your system the "Xpress Install" will continue to install other drivers. Click "GO". - 37 - Driver Installation English Driver install finished!!you have to reboot system!! Item Description n VIA 4IN1 Driver For INF, AGP, IDE and DMA Driver n USB Path for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP n VIA LAN Driver * VIA 10/100 LAN driver n VIA AC97 Audio Driver Audio driver for AC97 codec chipset n VIA USB 2. 0 Controller USB 2. 0 Driver information for XP For USB2. 0 driver support under Windows XP operating system, please use Windows Service Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus controller" under "Device Manager". [. . . ]