User manual GIGABYTE FA5DP

[. . . ] The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Disclaimer The information contained in this documentation is subject to change without notice. Gigabyte Technology makes no representations or warranties of any kind, either express or implied, with respect to the contents hereof, including but not limited to implied warranties of merchantability or fitness for a particular purpose. [. . . ] E2 G-MAXTM Flex ATX Series User's Manual I. Chassis Dimension 410(D)mm x 89(W)mm x 305(H)mm This chassis is made with material complied with UL specification and designed for space saving and easy open with thumbscrew. There are one 5. 25" and two 3. 5" drive bays. This chassis complies with corresponding EMC and safety regulations. Motherboard See Motherboard Manual for details. Power Supply The F-ATX switching power supply included with this product supports soft off function. Hence, the system can be shut down automatically. Note: Please check the voltage requirements in the country you reside before turning on the PC. Package Contents CPU cooler (Option) PC Software and Manuals Cables Foot Stand Mouse (Option) Keyboard (Option) Power Cord P. E3 G-MAXTM Flex ATX Series User's Manual Assembling the System HDD Assembly 1. Unscrew each side of the chassis and push the panel together with the uppercase toward the front. 2. Take both the screws on the front end off and pull the HDD supporting frame out. HDD frame 3. Connect fan power connector of CPU cooler to CPU FAN on the motherboard. Place the CPU into the CPU socket on the motherboard. Make sure that you have lifted the transversal lever and aligned the aslant side of the CPU along the aslant side of the CPU socket. After CPU is secured tightly onto the CPU socket, release the transversal lever and attach it to the CPU socket. Evenly spread the heat dispersion paste on the CPU and make sure it totally covers the CPU. The CPU fan must be tightly attached on the CPU to maximize the effect of heat dispersion. E4 G-MAXTM Flex ATX Series User's Manual CPU Pin Pull the transversal lever Evenly spread the heat dispersion paste on the CPU Power Supply Click cooler lock on the pin at sides of CPU socket. Fix the cooler on the rack. Set CPU clock frequency in BIOS Setup if needed, see Motherboard User's Manual for details. Memory of module DDR Position notches. Make sure that the notches should align the pin on memory slot on the motherboard P. [. . . ] Put the uppercase back to the chassis and tighten the screws back. . Introducing the Functions Front Panel Optical Device Button Optical Device Tray Power Button Power LED HDD LED Audio Out Drive Cabinet Door MIC In USB Port Floppy Floppy *PCMCIA Port *SPDIF Out *1394 Port *PCMCIA Button P. E8 G-MAXTM Flex ATX Series User's Manual Rear Panel Power Socket Keyboard Port (PS/2) COM Port COM Port / VGA Port Audio Out Audio In MIC In USB Port Voltage Switch Mouse Port(PS/2) LPT Port Game Port LAN Port *1394 Port Remarks 1. It is recommended to use a high-quality optical disk to avoid the risk of breaking disks during the operation of the high-speed optical disk drive. 2. Some of the items labeled with "*" may be different from the hardware specifications listed in this manual and such items are based on the actual shipment. Cautions for Safety 1. There is a risk of explosion if the Lithium battery of the system is not installed properly. [. . . ]