User manual GIGABYTE GA-6LXGL

[. . . ] 9 Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Installing the CPU and CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the CPU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Dual Channel Memory Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Installing a Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 1-3-1 1-3-2 1-4 Installing the Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1-4-1 1-4-2 1-5 1-6 2-1 2-2 Back Panel Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Options available: Turbo Performance/Max Non-Turbo Performance/Max bettery/Max Performance. Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low levels in response to processor load. Default setting is Enabled. Execute Disable Bit Intel Virtualization Technology Hardware Prefetcher Adjacent Cache Line Prefetch CPU AES Boot performance mode EIST (Enhanced Intel SpeedStep Technology) Turbo Mode Energy Performance When this item is enabled, tje processor will automatically ramp up the clock speed of 1-2 of its processing cores to improve its performance. When this item is disabled, the processor will not overclock any of its core. Energy Performance Bias is Intel CPU function. - 46 - BIOS Setup Platform power limit lock CPU C State The larger value in MSR_ENERGY_PERFORMANCE_BIAS register, CPU will save more power but lose more performance. Note: This register will be changed by OS too if OS support it like Windows 2008 or newer Linux. Options available: Performance : Write value 0 into MSR_ENERGY_PERFORMANCE_BIAS Balanced Performance: Write value 7 into MSR_ENERGY_PERFORMANCE_BIAS Balanced Energy: Write value 11 into MSR_ENERGY_PERFORMANCE_BIAS Energy Efficient: Write value 15 into MSR_ENERGY_PERFORMANCE_BIAS Default setting is Performance. Allows you to determine whether to let the CPU enter C3/C6 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. The C3/C6 state is a more enhanced power-saving state than C1. Define the SATA Device for Serial ATA Port 0/1. Options available: Hard Disk Drive/Solid State Drive. On an edge detect from 0 to 1, the PCH starts a COMreset initialization to the device. Default setting is Disabled. SATA Mode Selection SATA Test Mode Aggressive LPM Support SATA Controller Speed Software Feature Mask Configuration Serial Port 0/1/2/3/4/5 Port 0/1/2/3/4/5 Hot Plug (for Serial SATA Port 0/1/2/3/4/5) External SATA (for Serial SATA Port 0/1/2/3/4/5) SATA Device Type (for Serial SATA Port 0/1) Spin Up Device (for Serial SATA Port 0/1/2/3/4/5) BIOS Setup - 50 - 2-2-5-1 Software Feature Mask Configuration RAID 0 Enable/Disable RAID 0 feature. Enable/Disable the Intel Rapid Start Technology (IRSTe) funciton. The IRSTe enables your system to get up and running faster from even the deepest sleep, saving time and power consumption. Default setting is Disabled. RAID 1 RAID 10 RAID 5 Intel Rapid Recovery Technology OROM UI and BANNER Options available: Enabled/Disabled. Enable/Disable OROM UI and BANNER feature. Default setting is Enabled. - 51 - BIOS Setup HDD Unlock When this item is enabled, the HDD password unlock in the OS is enabled. When this item is enabled, the LED/SGPIO hardware is attached and ping to locate feature is enabled on the OS. When this item is enabled, only IRRT volumes can span internal and eSATA drives. [. . . ] Determines which devices system will boot to. Options available: Do not launch/UEFI only/Legacy only/Legacy first/UEFI first. - 93 BIOS Setup Other PCI device ROM priority For PCI devices other than Network, Mass storage or Video device, defines which OpROM to launch. Options available: UEFI OpROM/Legacy OpROM. [. . . ]