User manual GIGABYTE GA-6OX

[. . . ] FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] 360 K type is 40 tracks 720 K, 1. 2 M and 1. 44 M are all 80 tracks. Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that BIOS can not tell from 720 K, 1. 2 M or 1. 44 M drive type as they are all 80 tracks. (Default value) BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360 K. Disabled · Boot Up NumLock Status On Off Keypad is number keys. (Default value) Keypad is arrow keys. 48 6OX Motherboard · Security Option This category allows you to limit access to the system and Setup, or just to Setup. System Setup The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt. (Default value) · HDD S. M. A. R. T. Capability Enabled Disabled Enabled HDD S. M. A. R. T. (Default value) · Report No FDD For WIN 95 No Yes Assign IRQ6 For FDD. (Default value) FDD Detect IRQ6 Automatically. 49 BIOS Setup Advanced Chipset Features CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software Advanced Chipset Features Top Performance Disabled Item Help SDRAM Timing Control Auto SDRAM CAS Latency Time 3 Menu Level SDRAM Cycle Time Tras/Trc 7/9 SDRAM RAS-to-CAS Delay 3 SDRAM RAS Precharge Time 3 Delayed Transaction Enabled AGP Graphics Aperture Size 64MB System Memory Frequency SDRAM Buffer Strength X SWE#, SCAS#, SRAS, SMAA, SBS X SMD[63:0], SDQM[7:0] X SMAA#[7:4] (Rows 0/1) X SMAB#[7:4] (Rows 2/3) X SMAC#[7:4] (Rows 4/5) X SCS[0]# (Row 0) X SCS[1]# (Row 1) X SCS[2]# (Row 2) X SCS[3]# (Row 3) X SCS[4]# (Row 4) X SCS[5]# (Row 5) X SCKE[0]# (Row 0) X SCKE[1]# (Row 1) X SCKE[2]# (Row 2) X SCKE[3]# (Row 3) X SCKE[4]# (Row 4) X SCKE[5]# (Row 5) Auto Auto Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 4: Advanced Chipset Features These four items will be available when "SDRAM Timing Control" is set to Manual. This option will not be available when FSB DIP switch is present. 50 6OX Motherboard · Top Performance If you wish to maximize the performance of your system, set "Top Performance" as "Enabled". Disabled Enabled Disabled this function. (Default Value) Enabled Top Performance function. · SDRAM Timing Control Auto Manual Set SDRAM Timing Control to Auto. (Default value) Set SDRAM Timing Control to Manual. · SDRAM CAS latency Time 3 2 For Slower SDRAM DIMM module. (Default Value) For Fastest SDRAM DIMM module. · SDRAM Cycle Time Tras/Trc 7/9 5/7 Set SDRAM Tras/Trc Cycle time to 7/9 SCLKs. (Default value) Set SDRAM Tras/Trc Cycle time to 5/7 SCLKs. · SDRAM RAS-to-CAS delay 3 2 Set SDRAM RAS-to-CAS delay 3 SCLKs. (Default value) Set SDRAM RAS-to-CAS delay 2 SCLKs. · SDRAM RAS Precharge Time 3 2 Set SDRAM RAS Precharge Time to 3. (Default value) Set SDRAM RAS Precharge Time to 2. · Delayed Transaction Disabled Enabled Normal operation. (Default value) · AGP Graphics Aperture Size 32 MB 64 MB AGP Graphics Aperture Size is 32MB. (Default Value) 51 BIOS Setup · System Memory Frequency Auto 100MHz 133MHz Set System Memory Frequency to Auto. [. . . ] It can help you check out which kind of motherboard and which brand of Flash ROM are supported. In method I, if it shows two or more motherboard's model names to be selected, please make sure your motherboard's model name again. Sellecting name will cause the system unbooted. In method II, be sure that motherboard's model name in BIOS unzip file are the same as your motherboard's. [. . . ]