User manual GIGABYTE GA-6TXSL

[. . . ] GA-6TXSL-RH Intel® Core i7 Series Processor Motherboard USER'S MANUAL Intel® CoreTM2 Quad processorMotherboard Rev. 1001 * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!The WEEE marking applies only in European Union's member states. * GA-6TXSL-RH Motherboard English Copyright © 2009 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. [. . . ] (Default setting) Disable this function. Enable Multimedia Timer 35 GA-6TXSL-RH Motherboard English Intel VT for Directed I/O (VT-d) 36 BIOS Setup Intel VT for Directed I/O (VT-d) Enabled Disabled Enabled Disabled Intel VT for Directed I/O (VT-d). (Default setting) Disable Intel VT for Directed I/O (VT-d). (Default setting) Disable Interrupt Remapping. (Default setting) Disable PassThrough DMA. Enable VT-d support for Port 1~Port 10 ports through ATSR structures in ACPI Tables. (Default setting) Disable VT-d for Port1~Port 10. Interrupt Remapping Coherency Support Enabled Disabled ATS Enabled Disabled PassThrough DMA Enabled Disabled Enabled Disabled VT-d for Port1~Port 10 37 GA-6TXSL-RH Motherboard English PCI Configuration 38 BIOS Setup PCI Slot 1/2/3/4/5/6 Option ROM Enabled Disabled Defualt setting is to Defualt Enable this item to initialize device expansion ROM. (Defualt setting) Disable this function. Slot 1/Slot2/Slot3/Slot4/Slot5/Slot6 Latency Timer Onboard Swith LAN1Option ROM Enabled Enable onboard LAN1 device and initialize device expansion ROM. (Default setting) Disabled Enabled Disabled Disable this function. (Defualt setting) Enable onboard Lan 82567 device. (Default setting) Disable this function. Onboard LAN iSCSI Boot ROM Onboard Lan 82567 Switch Enabled Disabled Onboard Lan 82567 ROM Enabled Disabled Legacy USB Support Enabled Disabled 39 GA-6TXSL-RH Motherboard English SATA Configuration 40 BIOS Setup Serial ATA Enabled Auto Serial ATA Compatible Mode Enhanced Mode SATA RAID Enable Enabled Disabled SATA AHCI Enable Enabled Disabled Set this item to enable SATA AHCI function for WinXP-SP1+IAA driver supports AHCI mode. (Default setting) Enabled SATA RAID function. (Default setting) Disabled Enables on-board serial ATA function. (Default setting) Disables on-board serial ATA function. (Default setting) Set Native mode to Serial ATA. SATA and PATA drives are auto-detected and placed in Legacy mode. SATA and PATA drives are auto-detected and placed in Native mode. (Default setting) Native Mode Operation This option allows user to set the native mode for Serial SATA Controller Mode Option Note: Pre-Win2000 operating system do not work in Enhanced mode. SATA Port 0/1/2/3/4/5 The category identifies the types of Serial SATA hard disk from drive 0 to 5 that has been installed in the computer. System will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. [. . . ] On-board COM B Use Serial Port B as the COM port address. (Default setting) Flow Control This option provide user to enable the flow control function. (Default setting) 54 GA-6TXSL-RH Motherboard English Baud Rate This option allows user to set the specified baud rate. Options 300, 1200, 2400, 9600, 19. 2K, 38. 4K, 57. 6K, 115. 2K. TerminalType This option allows user to select the specified terminal type. [. . . ]