User manual GIGABYTE GA-6WMMC7-1

[. . . ] Wake -Up on LAN (The ATX power supply supports larger than 720 mA 5V Stand-By current). 5. 6. 1. 1 First Edition R-11-01-000417 6BX7+ The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Sound Blaster is a registered trademark of Creative Technology Ltd in the United States and certain other countries. [. . . ] DualBIOSTM provides automatic recovery for the BIOS. When the first BIOS used during boot up does not complete or if a BIOS checksum error occurs, boot-up is still possible. In the DualBIOS TM utility, the "Auto Recovery" option will guarantee that if either the main BIOS or backup BIOS is corrupted, the DualBIOSTM technology will use the good BIOS and correct the wrong BIOS automatically. DualBIOSTM provides manual recovery for the BIOS. DualBIOSTM technology contains a built-in flash utility, which can flash your system BIOS from backup to main and/or visa versa. There is no need for an OS-dependent flash utility program. DualBIOSTM contains a one-way flash utility. The built-in one-way flash utility will ensure that the corrupt BIOS is not mistaken as the good BIOS during recovery and that the correct BIOS (main vs. This will prevent the good BIOS from being flashed. IV. Every user should have DualBIOSTM technology due to the advancement of computer viruses. Everyday, there are new BIOS-type viruses discovered that will destroy your system BIOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 2. SPECIFICATION 2. 1. HARDWARE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 2. 2. SOFTWARE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2. 3. ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 3. HARDWARE INSTALLATION 3. 1. UNPACKING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 3. 2. MAINBOARD LAYOUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 3. 3. QUICK REFERENCE FOR JUMPERS & CONNECTORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 3. 4. DRAM INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 3. 5. CPU SPEED SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 3. 6. CMOS RTC & ISA CFG CMOS RAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 3. 7. SPEAKER CONNECTOR INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 3. 8. [. . . ] CPU SPEED SETUP The system bus speed can be set to 66 / 100MHz form the DIP SWITCH (SW). The user can change the DIP SWITCH selection to set up the CPU speed for different processors. Pentium ® II / III CPU 300 / 66MHz 333 / 66MHz 366 / 66MHz 400 / 66MHz 433 / 66MHz 466 / 66MHz 500 / 66MHz 533 / 66MHz * 566 / 66MHz 500 / 100MHz 550 / 100MHz 600 / 100MHz 650 / 100MHz 700 / 100MHz 750 / 100MHz 800 / 100MHz * 850 / 100MHz 1 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF 2 ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON 3 OFF OFF OFF ON ON ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF 4 ON ON ON OFF OFF OFF OFF OFF OFF ON ON OFF OFF OFF OFF OFF OFF 5 ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF 6 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 7 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 8 ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF « We don't recommend you to setup your CPU ratio above 8 nth, it doesn't support now. 3-7 Hardware Installation Main Clock Table CLK 66 MHz 152 MHz 142MHz 100 MHz 112MHz 124 MHz 133 MHz PCI Run 44. 3 MHz 133 MHz PCI Run 33. 3 MHz ON ON ON OFF 5 ON ON ON OFF OFF OFF OFF 6 OFF OFF ON OFF OFF ON ON 7 OFF ON OFF OFF ON ON OFF 8 ON OFF OFF OFF OFF OFF OFF M The CPU is a sensitive electric component and it can be easily damaged by static electricity, so users must keep it away from metal surface when the CPU is installed onto main board. 3. 6. CMOS RTC & ISA CFG CMOS RAM There're RTC & CMOS RAM on board; they have a power supply from external battery to keep the DATA inviolate & effective. The RTC is a REAL-TIME CLOCK device, which provides the DATE & TIME to system. [. . . ]