User manual GIGABYTE GA-78LMT-S2

[. . . ] 1001 Motherboard GA-78LMT-S2 Motherboard GA-78LMT-S2 Apr. 20, 2012 Copyright © 2012 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. [. . . ] Options are: Auto (default), 4T~7T. Write Recovery Time Precharge Time Row Cycle Time RAS to RAS Delay Channel Interleaving Bank Interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. (Default: Enabled) Enables or disables memory bank interleaving. Enabled allows the system to simultaneously access different banks of the memory to increase memory performance and stability. (Default: Enabled) Enables or disables memory DQS training each time the system restarts. (Default: Skip DQS) Determines whether to enable memory clock tri-stating in CPU C3 or Alt VID mode. (Default: Disabled) DQS Training Control Memclock tri-stating ******** System Voltage Optimized ******** System Voltage Control DDR3 Voltage Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the system voltages as required. Manual allows all voltage control items below to be configurable. (Default: Auto) Allows you to set memory voltage. Normal Supplies the memory voltage as required. (Default) 1. 500V ~ 1. 900V The adjustable range is from 1. 500V to 1. 900V. Note: Increasing memory voltage may result in damage to the memory. The adjustable range is dependent on the CPU being installed. (Default: Normal) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. Allows you to set the CPU North Bridge VID voltage. Auto sets the CPU North Bridge VID voltage as required. The adjustable range is dependent on the CPU being installed. (Default: Normal) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. - 24 - CPU Voltage Control CPU NB VID Control Normal CPU Vcore Normal CPU Vcore NB Displays the normal operating voltage of your CPU. Displays the normal operating voltage of your CPU North Bridge. 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2012 Award Software Standard CMOS Features Date (mm:dd:yy) Thu, Apr 19 2012 Time (hh:mm:ss) 22:31:24 } } } } } } IDE Channel 0 Master IDE Channel 0 Slave IDE Channel 1 Master IDE Channel 1 Slave IDE Channel 2 Master IDE Channel 2 Slave Halt On Base Memory Extended Memory [None] [None] [None] [None] [None] [None] [All, But Keyboard] 640K 766M ESC: Exit F1: General Help F7: Optimized Defaults Item Help Menu Level  : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults Date (mm:dd:yy) Time (hh:mm:ss) Sets the system date. Sets the system time. IDE Channel 0, 1 Master/Slave IDE Channel 0, 1 Master/Slave Configure your SATA devices by using one of the three methods below: •• None  If no SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. [. . . ] Installing Windows XP Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID driver. " Insert the floppy disk containing the SATA RAID/AHCI driver. Follow the on-screen instructions to install the driver that suits your operating system. When completed, proceed with the Windows XP installation. B. Installing Windows 7/Vista (The following instructions use Windows 7 as the example operating system. ) Restart your system to boot from the Windows 7/Vista setup disk and perform standard OS installation steps. [. . . ]