User manual GIGABYTE GA-78LMT-S2PT

[. . . ] GA-78LMT-S2PT User's Manual Rev. 3102 12ME-78LMT2T-3102R Motherboard GA-78LMT-S2PT Motherboard GA-78LMT-S2PT Nov. 25, 2011 Copyright © 2011 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. [. . . ] (Default: Disabled) & DQS Training Control & Memclock tri-stating ******** System Voltage Optimized ******** & System Voltage Control & DDR3 Voltage Control Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the system voltages as required. Manual allows all voltage control items below to be configurable. (Default: Auto) Allows you to set memory voltage. Normal Supplies the memory voltage as required. (Default) +0. 100V ~ +0. 300V The adjustable range is from 0. 100V to 0. 300V. Note: Increasing memory voltage may result in damage to the memory. Allows you to set the North Bridge voltage. Normal Supplies the North Bridge voltage as required. (Default) +0. 1V ~ +0. 3V The adjustable range is from 0. 1V to 0. 3V. Allows you to set the South Bridge voltage. Normal Supplies the South Bridge voltage as required. (Default) +0. 1V ~ +0. 2V The adjustable range is from 0. 1 to 0. 2V. Allows you to set the CPU North Bridge VID voltage. Auto sets the CPU North Bridge VID voltage as required. The adjustable range is dependent on the CPU being installed. (Default: Normal) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. & NorthBridge Volt Control & SouthBridge Volt Control & CPU NB VID Control - 25 - & CPU Voltage Control & Normal CPU Vcore Allows you to set the CPU voltage. The adjustable range is dependent on the CPU being installed. (Default: Auto) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. Displays the normal operating voltage of your CPU. 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) Wed, Nov 9 2011 22:31:24 [None] [None] [None] [None] [None] [None] [None] [None] [All, But Keyboard] 640K 766M +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Item Help Menu Level ` ` ` ` ` ` ` ` ` IDE Channel 0 Master IDE Channel 0 Slave IDE Channel 1 Master IDE Channel 1 Slave IDE Channel 2 Master IDE Channel 2 Slave IDE Channel 3 Master IDE Channel 3 Slave Halt On Base Memory Extended Memory Enter: Select : Move F5: Previous Values & Date (mm:dd:yy) & Time (hh:mm:ss) Sets the system date. Sets the system time. & IDE Channel 0, 1 Master/Slave & IDE Channel 2/3 Master/Slave IDE Channel 0, 1 Master/Slave Configure your SATA devices by using one of the three methods below: · None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. · Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. [. . . ] Installing Windows XP Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID driver. " Insert the floppy disk containing the SATA RAID driver. Follow the on-screen instructions to install the driver that suits your operating system. When completed, proceed with the Windows XP installation. B. Installing Windows 7/Vista Restart your system to boot from the Windows 7/Vista setup disk and perform standard OS installation steps. [. . . ]