User manual GIGABYTE GA-7PCSLN

[. . . ] GA-7PCSL GA-7PCSLX User's Manual Rev. 1001 LGA1356 socket motherboard for Intel® Xeon® series processors Copyright © 2012 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. [. . . ] This setup page provides configuration of boot up devices. Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing <F10> can also carry out this task. ) Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation message will exit BIOS Setup. (Pressing <Esc> can also carry out this task. )  Advanced  Chipset  Security  Server Management  Boot Options  Boot Manager  Exit - 55 - BIOS Setup 2-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu. Submenu Help While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the menu. Press <Esc> to exit the help screen. Help for each item is in the Item Help block on the right side of the submenu. • When the system is not stable as usual, select the Load Default Values item to set your system to its defaults. • The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version. BIOS Setup - 56 - BIOS Version Memory Display version number of the BIOS setup utility. Determines how much total memory is present during the POST. Set the date following the weekday-month-day- year format. Set the system time following the hour-minute- second format. Display the current accessing level information. System Date System Time Access Level - 57 - BIOS Setup 2-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. BIOS Setup - 58 - 2-2-1 PCI Configuration PCI Express Slot 1/2/3/4 Option ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Enable/Disable onboard LAN1 device and initialize device expansion ROM. When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI. When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI. Set maximum playlooad for PCI Express Device or allow system BIOS to select the value. Options available: Auto/128 Bytes/256 Bytes/512 Bytes/1024 Bytes/2048 Bytes/4096 Bytes. [. . . ] Please note that the IP address must be in three digitals, for example, 192. 168. 000. 001. Display Default Gateway Address information. Default Gateway Address - 85 - BIOS Setup 2-5-3 System Event Log Enabling/DIsabling Options SEL Components Enable/Disable all features fo system event logging during system boot. Options available: Enabled/Disabled. Erasing Settings Erase SEL Choose this option for erasing Smbios Event Log is done prior to any logging activation during reset. Options available: Yes/No. BIOS Setup - 86 - 2-6 Boot Option Menu The Boot menu allows you to set the drive priority during system boot-up. [. . . ]