User manual GIGABYTE GA-7VKML

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before pwblicution of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] Enable onboard Serial port 1 and address is 2E8. Disable onboard Serial port 1. FOnboard Serial Port 2 8Auto 83F8/COM1 82F8/COM2 83E8/COM3 82E8/COM4 8Disabled BIOS will automatically setup the port 2 address (Default Value). Enable onboard Serial port 2 and address is 3F8. Enable onboard Serial port 2 and address is 2F8. Enable onboard Serial port 2 and address is 3E8. Enable onboard Serial port 2 and address is 2E8. Disable onboard Serial port 2. FSerial Port 2 Mode 8Normal 8IrDA 8ASKIR Normal operation. (Default Value) Onboard I/O chip supports IrDA. Onboard I/O chip supports ASKIR. GA-7VKML Series Motherboard - 50 - FOnBoard Parallel port 8378 8278 83BC 8Auto 8Disabled Enable On Board LPT port and address is 378. Enable On Board LPT port and address is 278. Enable On Board LPT port and address is 3BC. (Default Value) Disable On Board LPT port. English FParallel Port Mode 8EPP 8ECP 8Normal 8EPP+ECP Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. Using Parallel port as Enhanced Parallel Port & Extended Capabilities Port. FParallel Port IRQ 87 8Auto 85 Set Parallel Port IRQ is 7. Set Auto to parallel Port IRQ DMA Channel. (Default Value) Set Parallel Port IRQ is 5. FParallel Port DMA 83 8Auto 81 80 Set Parallel Port DMA is 3. Set Auto to parallel port mode DMA Channel. (Default Value) Set Parallel Port DMA is 1. Set Parallel Port DMA is 0. FOnBoard MIDI Port 8300 8310 8320 8330 8Disabled Set 300 for MIDI Port. Disabled this function. - 51 - BIOS Setup English C Midi Port IRQ 85 810 811 Set M idi Port IRQ to 5. (Default Value) Set Midi Port IRQ to 10. Set Midi Port IRQ to 11. FOnBoard Game Port 8201 8209 8Disabled Set 201 for Game Port. (Default Value) Set 209 for Game Port. [. . . ] If the cable is your own cable, please remove it from this pin and do not connect any of your own cables to it. English - 93 - Appendix English Question 10: Sometimes I hear different continuous beeps from computer after system boots up. Answer: The beep codes below may help you identify the possible computer problems. However, they are only for reference purposes. The situations might differ from case to case. [. . . ]