User manual GIGABYTE GA-7VKMLS

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publicution of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] (Y/N)?N DETECTION PNP / PCI CONFIGURATION IDE HDD AUTO LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit F7: Optimized Values : Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Save & Exit F8: Q-Flash Utility Load Fail-Safe Defaults Figure 7: Load Fail-Safe Defaults Load Fail-Safe Defaults Fail-Safe defaults contain the most appropriate system parameter values of to configure the system to achieve maximum stability. - 41 - BIOS Setup English Load Optimized Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 (C) 2001 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Load Optimized Defaults?(Y/N)?N DETECTION PNP / PCI CONFIGURATION IDE HDD AUTO LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit F7: Optimized Values : Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Save & Exit F8: Q-Flash Utility Load Optimized Defaults Figure 8: Load Optimized Defaults Load Optimized Defaults Optimized defaults contain the most appropriate system parameter values to configure the system to achieve maximum performance. GA-7VKMLS Motherboard - 42 - Integrated Peripherals AMIBIOS SETUP - INTEGRATED PERIPHERALS ( C ) 2001 American Megatrends, Inc. All Rights Reserved OnBoard IDE IDE1 Conductor Cable IDE2 Conductor Cable OnBoard FDC OnBoard Serial Port 1 OnBoard Serial Port 2 OnBoard Parallel Port Parallel Port Mode Parallel Port IRQ Parallel Port DMA OnBoard MIDI Port MIDI Port IRQ OnBoard Game Port OnBoard AC'97 Audio OnBoard Lan Chip :Both :Auto :Auto :Auto :Auto :Auto :Auto :ECP :Auto :Auto :300 :5 :201 :Auto :Enabled ESC : Quit F1 : Help F5 : Old Values F6 : Fail-Safe F8 : Q-Flash Utility Figure 9: Integrated Peripherals : Select Item PU/PD+/-/ : Modify (Shift)F2: Color F7:Optimized English OnBoard IDE Disabled Both Primary Secondary Disabled OnBoard IDE Set OnBoard IDE is Both (Default Value). Set OnBoard IDE is Primary Set OnBoard IDE is Secondary IDE1 Conductor Cable Auto ATA66/100 ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100). Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). - 43 BIOS Setup English IDE2 Conductor Cable Auto ATA66/100 ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100). Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). On Board FDC Auto Disabled Enabled Set On Board FDC is Auto (Default Value). Disabled On Board FDC Enabled On Board FDC Onboard Serial Port 1 Auto 3F8/COM1 2F8/COM2 3E8/COM3 2E8/COM4 Disabled BIOS will automatically setup the port 1 address (Default Value). Enable onboard Serial port 1 and address is 3F8. Enable onboard Serial port 1 and address is 2F8. Enable onboard Serial port 1 and address is 3E8. Enable onboard Serial port 1 and address is 2E8. Disable onboard Serial port 1. Onboard Serial Port 2 Auto 3F8/COM1 2F8/COM2 3E8/COM3 2E8/COM4 Disabled BIOS will automatically setup the port 2 address (Default Value). Enable onboard Serial port 2 and address is 3F8. Enable onboard Serial port 2 and address is 2F8. Enable onboard Serial port 2 and address is 3E8. Enable onboard Serial port 2 and address is 2E8. Disable onboard Serial port 2. OnBoard Parallel port 378 278 3BC Auto Disabled Enable On Board LPT port and address is 378. Enable On Board LPT port and address is 278. [. . . ] In method I, if the BIOS file you need cannot be found in @BIOSTM server, please go onto Gigabyte's web site for downloading and updating it according to method II. Please note that any interruption during updating will cause system unbooted GA-7VKMLS Motherboard - 70 - English - 71 - Technical Reference English GA-7VKMLS Motherboard - 72 - Revision History Chapter 5 Appendix Picture below are shown in Windows XP (VUCD driver version 2. 1) Appendix A: KM266 Chipset Drivers Installation A. VIA 4 in 1 Service Pack Driver Utility: Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup. exe. [. . . ]