User manual GIGABYTE GA-7VR

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to up date the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] 8S1/S3/S4/S5 Keyboard is able to Wakeup the system from S1/S3/S4/S5 state. F PS/2 Wak eup From 8S1(Suspend) PS/2 Mouse is able to Wakeup the system from S1(Suspend) state. (Default value) 8S1/S3 PS/2 Mouse is able to Wakeup the system from S1/S3 state. 8S1/S3/S4/S5 PS/2 Mouse is able to Wakeup the system from S1/S3/S4/S5 state. F Resume On RTC Alarm You can set "RTC Alarm Power On" item to enabled and key in Data/time to power on system. 8Disabled 8Enabled Disable this function. (Default Value) Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. RTC Alarm Date:Everyday, 1~31 RTC Alarm Hour:0~23 RTC Alarm Minute : 0~59 RTC Alarm Second:0~59 - 35 - BIOS Setup English PNP/PCI Configuration AMIBIOS SETUP - PNP/PCI CONFIGURATION ( C ) 2001 American Megatrends, Inc. All Rights Reserv ed VGA Boot From PCI Slot 1/5 IRQ Priority PCI Slot 2 IRQ Priority PCI Slot 3 IRQ Priority PCI Slot 4 IRQ Priority : AGP : Auto : Auto : Auto : Auto ESC: Quit F1 : Help F5 : Old Values F6 : Fail-Safe F8 : Q-Flash Utility Figure 6: PNP/PCI Configuration hifg: Select Item PU/PD+/-/ : Modify (Shift)F2: Color F7:Optimized FVGA Boot From 8AGP 8PCI Set VGA Boot from AGP VGA Card. (Default Value) Set VGA Boot from PCI VGA Card. FPCI Slot1 /5, 2, 3, 4 IRQ Priority 8Auto 83 84 85 The system will reserved a free IRQ for PCI slot 1/5, 2, 3, 4 device. (Default Value) The system will reserved IRQ3 for PCI slot 1/5, 2, 3, 4 device if no legacy ISA device using IRQ3. The system will reserved IRQ for PCI slot 1/5, 2, 3, 4 device if no legacy ISA device using IRQ4. The system will reserved IRQ5 for PCI slot 1/5, 2, 3, 4 device if no legacy ISA device using IRQ5. GA-7VR Motherboard - 36 - 87 89 810 811 The system will reserved IRQ7 for PCI slot 1/5, 2, 3, 4 device if no legacy ISA device using IRQ7. The system will reserved IRQ9 for PCI slot 1/5, 2, 3, 4 device if no legacy ISA device using IRQ9. The system will reserved IRQ10 for PCI slot 1/5, 2, 3, 4 device if no legacy ISA device using IRQ10. The system will reserved IRQ11 for PCI slot 1/5, 2, 3, 4 device if no legacy ISA device using IRQ11. English - 37 - BIOS Setup English Load Fail-Safe Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 (C) 2001 American Megatrends, Inc. All Rights Reserv ed STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Load Fail-Safe Defaults?HDD AUTO DETECTION PNP / PCI CONFIGURATION IDE (Y/N)?N LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit hifg: Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Sav e & Ex it F7: Optimized Values F8:Q-Flash Utility Load Fail-Safe Defaults ex cept Standard CMOS SETUP Figure 7: Load Fail-Safe Defaults FLoad Fail-Safe Defaults Fail-Safe defaults contain the most appropriate system parameter values of to configure the system to achieve maximum stability. GA-7VR Motherboard - 38 - Load Optimized Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 (C) 2001American Megatrends, Inc. All Rights Reserv ed STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD English Load Optimized Defaults?(Y/N)?N DETECTION PNP / PCI CONFIGURATION IDE HDD AUTO LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit hifg: Select Item F7: Optimized Values SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Sav e & Ex it F8:Q-Flash Utility Load Optimized Defaults ex cept Standard CMOS SETUP Figure 8: Load Optimized Defaults FLoad Optimized Defaults Optimized defaults contain the most appropriate system parameter values to configure the sy stem to achiev e max imum performance. - 39 - BIOS Setup English Integrated Peripherals AMIBIOS SETUP - INTEGRATED PERIPHERALS ( C ) 2001 American Megatrends, Inc. All Rights Reserv ed OnBoard IDE IDE1 Conductor Cable IDE2 Conductor Cable OnBoard FDC OnBoard Serial Port 1 OnBoard Serial Port 2 OnBoard Parallel Port Parallel Port Mode Parallel Port IRQ Parallel Port DMA OnBoard MIDI Port MIDI Port IRQ OnBoard Game Port OnBoard AC' Audio 97 :Both :Auto :Auto :Auto :Auto :Auto :Auto :ECP :Auto :Auto :300 :5 :200 :Auto ESC : Quit F1 : Help F5 : Old Values F6 : Fail-Safe F8 : Q-Flash Utility Figure 9: Integrated Peripherals higf: Select Item PU/PD+/-/ : Modify (Shift)F2: Color F7:Optimized F OnBoard IDE 8Disabled 8Both 8Primary 8Secondary Disabled OnBoard IDE Set OnBoard IDE is Both (Default Value). Set OnBoard IDE is Primary Set OnBoard IDE is Secondary C IDE1 Conductor Cable 8Auto 8ATA66/100/133 8ATA33 GA-7VR Motherboard Will be automatically detected by BIOS. (Default Value) Set IDE1 Conduc tor Cable to ATA66/ 100/133 (Please mak e sure y our IDE dev ic e and cable is c ompatible w ith ATA66/100/ 133). Set IDE1 Conduc tor Cable to ATA33 (Please m ake sure y our IDE dev ice and c able is c ompatible w ith ATA33). - 40 - C IDE2 Conductor Cable 8Auto 8ATA66/100/133 8ATA33 Will be automatically detected by BIOS. [. . . ] Microsoft(R) Windows98 © Copyright Microsoft Corp 1981-1999 A:\> dir/w Volume in drive A has no label Volume Serial Number is 16EB-353D Directory of A:\ COMMAND. COM 7VTX. F4 FLASH841. EXE 3 file(s) 838, 954 bytes 0 dir(s) 324, 608 bytes free A:\> Flash841 7VTX. F4 (2) Now screen appears the following Flash Utility main menu. Press "Enter", the highlighted item will locate on the model name of the right-upper screen. Right after that, press "Enter" to start BIOS Flash Utility. English - 67 - Appendix English (3) It will pop up a screen and asks "Are you sure to flash the BIOS?" Press [Enter] to continue the procedure, or press [ESC] to quit. Beware: Please do not turn off the system while you are upgrading BIOS. [. . . ]