User manual GIGABYTE GA-8I865GVME

[. . . ] GA-8I865GVME Intel® Pentium® 4 Processor Motherboard User's Manual Rev. 1003 12ME-865GVME-1003R * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!* The WEEE marking applies only in European Union's member states. Motherboard GA-8I865GVME Motherboard GA-8I865GVME Jul. 2005 Copyright © 2006 GIGA-BYTE TECHNOLOGY CO. , LTD. [. . . ] Using Parallel port as Enhanced Parallel Port 1. 7 and ECP mode. (Default value) Set ECP Mode Use DMA to 1. ECP Mode Use DMA 3 1 GA-8I865GVME Motherboard - 36 - 2-4 Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Power Management Setup [S1(POS)] [Blinking] [Instant-Off] [Soft-Off] [Enabled] [Enabled] [Disabled] Everyday 0:0:0 Item Help Menu Level English ACPI Suspend Type Power LED in S1 state Off by Power button AC BACK Function PME Event Wake Up ModemRingOn/WakeOnLan Resume by Alarm x Date (of Month) Alarm x Time (hh:mm:ss) Alarm : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults ACPI Suspend Type S1(POS) S3(STR) Blinking Dual/OFF Set ACPI suspend type to S1/POS(Power On Suspend). (Default value) Set ACPI suspend type to S3/STR(Suspend To RAM). In standby mode(S1), poer LED will blink. If use single color LED, power LED will turn off. If use dual color LED, power LED will turn to another color. Press power button then Power off instantly. (Default value) Press power button 4 sec. Enter suspend if button is pressed less than 4 seconds. When AC-power back to the system, the system will be in "Off" state. (Default value) When AC-power back to the system, the system always in "On" state. When AC-power back to the system, the system will return to the Last state before AC-power off. Power LED in S1 state Off by Power button Instant-off Delay 4 Sec. AC BACK Function Soft-Off Full-On Memory PME Event Wake Up This feature requires an ATX power supply that provides at least 1A on the 5VSB lead. (Default value) ModemRingOn/WakeOnLan An incoming call via modem can awake the system from any suspend state or an input signal comes from the other client server on the LAN can awake the system from any suspend state. Disabled Disable Modem Ring On / Wake On LAN function. Enabled Enable Modem Ring On / Wake On LAN function. (Default value) - 37 - BIOS Setup English Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Date/Time to power on system. (Default value) Enabled Enable alarm function to POWER ON system. Date (of Month) Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) 2-5 PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2005 Award Software PnP/PCI Configurations PCI 1 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment [Auto] [Auto] [Auto] Item Help Menu Level Device(s) using this INT: : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults PCI 1 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 1. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 1. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 2. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 3. PCI 2 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 PCI 3 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 GA-8I865GVME Motherboard - 38 - 2-6 PC Health Status CMOS Setup Utility-Copyright (C) 1984-2005 Award Software PC Health Status Current CPU Temperature Current System Temperature Vcore DDR25V +3. 3V +12V Current CPU FAN Speed Current SYSTEM FAN Speed 25 oC 32 oC 1. 35V 2. 39V 3. 28V 11. 84V 3308 RPM 0 RPM Item Help Menu Level English : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Current CPU/System Temperature Detect CPU/System temperature automatically. Current Voltage(V) Vcore / DDR25V / +3. 3V / +12V Detect system's voltage status automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/SYSTEM Fan speed status automatically. - 39 - BIOS Setup English 2-7 Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Frequency/Voltage Control [15X] [Disabled] 133 66/33 [Auto] 266 66/33 Item Help Menu Level Set CPU Ratio if CPU Ratio is unclocked CPU Clock Ratio CPU Host Clock Control x CPU Host Frequency (Mhz) x AGP/PCI Fixed Memory Frequency For Memory Frequency (Mhz) AGP/PCI Frequency (Mhz) : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Incorrect using these features may cause your system broken. For power end-user use only. CPU Clock Ratio This setup option will automatically assign by CPU detection. [. . . ] Support : http://tw. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address : http://www. gigabyte. de Japan NIPPON GIGA-BYTE CORPORATION WEB address : http://www. gigabyte. co. jp Singapore GIGA-BYTE SINGAPORE PTE. Support : http://tw. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address: http://www. gigabyte. com. sg U. K. [. . . ]