User manual GIGABYTE GA-8IPE1000 PRO2

[. . . ] When you installing AGP card, please make sure the following notice is fully understood and practiced. If your AGP card has "AGP 4X/8X (1. 5V) notch"(show below), please make sure your AGP card is AGP 4X/8X (1. 5V). AGP 4X/8X notch Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/ G) / 850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system unable to boot up normally. Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot. [. . . ] For pow er End-User use only ! AGP/PCI/S RC Fixed Serial ATA dev ice is v ery sensitiv e to SRC clock. SRC ov er clock may make Serial ATA dev ice function can't w ork properly . Adjust AGP/PCI/SRC clock asy chrohous w ith CPU. Memory Frequency For for FSB(Front Side Bus) frequency =400MHz, 2. 0 2. 66 Auto 2. 0 2. 5 Auto Memory Frequency = Host clock X 2. 0. (Default v alue) Memory Frequency = Hos t clock X 2. 0. (Default v alue) for FSB(Front Side Bus) frequency =533MHz, for FSB(Front Side Bus) frequency =800MHz, 2. 0 1. 6 1. 33 Auto Memory Frequency = Host clock X 2. 0. (Default v alue) Memory Frequency(Mhz) The v alues depend on CPU Host Frequency (Mhz) . GA-8IPE1000 Series Motherboard - 56 - AGP/PCI/SRC Frequency(Mhz) The v alues depend on Fix ed AGP/PCI/SRC Frequency . English DIMM OverVol tage Control Normal +0. 1V +0. 2V +0. 3V Set DIMM Ov erVoltage Control to Normal. (Default v alue) Set DIMM Ov erVoltage Control to +0. 1V. Set DIMM Ov erVoltage Control to +0. 3V. AGP OverVoltage Control Normal +0. 1V +0. 2V +0. 3V Set AGP Ov erVoltage Control to Normal. (Default v alue) Set AGP Ov erVoltage Control to +0. 1V. Set AGP Ov erVoltage Control to +0. 3V. CPU Voltag e Control Supports adjustable CPU Vcore from 0. 8375V to 1. 7600V. (Default v alue: Normal) Normal CPU Vcore Display y our CPU Vcore Voltage. - 57 - BIOS Setup English Select Language (*Y ) CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are }Standard CMOS Features }Adv anced BIOS Features }Integrated Peripherals }Pow er Management Setup }PnP/PCI Configurations }PC Health Status }Frequency /Voltage Control ESC:Quit F8: Dual BIOS ( * Y) /Q-Flash Select Language ( * Y) Load Fail-Safe Defaults Load Optimized Defaults Set Superv isor Passw ord Set User Passw ord Sav e & Ex it Setup Ex it Without Sav ing F3: Change Language ( * Y) F10:Sav e & Ex it Setup Figure 9: Select Language Select Language Multi Language is supports 7 languages. There are English, Japanese, French, Spanish, German, Simplified Chinese, Traditional Chinese. (*) For GA-8IPE1000 Pro only. ( Y) For GA-8IPE1000 Pro2 only. GA-8IPE1000 Series Motherboard - 58 - English Load Fail-Safe Defaults CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are }Standard CMOS Features }Adv anced BIOS Features }Integrated Peripherals }Pow er Management Setup }PnP/PCI Configurations }PC Health Status }Frequency /Voltage Control ESC:Quit F8: Dual BIOS ( * Y) /Q-Flash Select Language ( * Y) Load Fail-Safe Defaults Load Optimized Defaults Load Fail-Safe Defaults?(Y/N)?Y ord Set User Passw Sav e & Ex it Setup Ex it Without Sav ing Set Superv isor Passw ord F3: Change Language ( * Y) F10:Sav e & Ex it Setup Load Fail-Safe Defaults Figure 10: Load Fail-Safe Defaults Load Fail-Safe Defaults Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. (*) For GA-8IPE1000 Pro only. ( Y) For GA-8IPE1000 Pro2 only. - 59 BIOS Setup English Load Optimized Defaults CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are }Standard CMOS Features }Adv anced BIOS Features }Integrated Peripherals }Pow er Management Setup }PnP/PCI Configurations }PC Health Status }Frequency /Voltage Control ESC:Quit F8: Dual BIOS ( * Y) /Q-Flash Select Language ( * Y) Load Fail-Safe Defaults Load Optimized Defaults Set Superv isor Passw ord Set User Passw ord Sav e & Ex it Setup Ex it Without Sav ing F3: Change Language ( * Y) F10:Sav e & Ex it Setup Load Optimized Defaults Figure 11: Load Optimized Defaults Load Optimized Defaults?(Y/N)?Y Load Optimized Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. (*) For GA-8IPE1000 Pro only. ( Y) For GA-8IPE1000 Pro2 only. GA-8IPE1000 Series Motherboard - 60 - English Set Supervisor/User Password CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are }Standard CMOS Features }Adv anced BIOS Features }Integrated Peripherals }Pow er Management Setup }PnP/PCI Configurations }PC Health Status }Frequency /Voltage Control ESC:Quit F8: Dual BIOS ( * Y) /Q-Flash Select Language ( * Y) Load Fail-Safe Defaults Load Optimized Defaults Set Superv isor Passw ord Set User Passw ord Sav e & Ex it Setup Ex it Without Sav ing F3: Change Language ( * Y) F10:Sav e & Ex it Setup Enter Password: Change/Set/Disable Passw ord Figure 12: Passw ord Setting When you select this function, the following message will appear at the center of the screen to assist you in creating a password. Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password. To disable password, just press <Enter> when you are prompted to enter password. [. . . ] Yes Failure has been excluded. Insert the VGA card. Then plug in ATX power cable and turn on the system. A - 99 - Appendix English A The problem could be caused by power supply, CPU, memory or CPU/ memory socket itself. Is memory LED on and CPU fan running? No Yes Failure has been excluded. No Check if there is display. Perhaps your VGA card / VGA slot or monitor is defective. Yes Turn off the system. Reboot after keyboard and mouse have been plugged in. Failure has been excluded. No Check if keyboard is working properly. It is possible that your keyboard or keyboard connector is defective. Yes Press <Del> to enter BIOS setup. [. . . ]