User manual GIGABYTE GA-8SMML

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to up date the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] Both Primary & Secondary IDE channel w ill be enabled. (Default Value) Only Primary IDE channel is enabled. Only Secondary IDE channel is enabled. English FIDE1 Conductor Cable 8Auto 8ATA66/100 Will be automatically detected by BIOS (Default Value) Set IDE1 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ic e and cable is compatible w ith ATA66/100) 8ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable is compatible w ith ATA33). FIDE2 Conductor Cable 8Auto 8ATA66/100 Will be automatically detected by BIOS (Default Value) Set IDE2 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ic e and cable is compatible w ith ATA66/100) 8ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable is compatible w ith ATA33). FOnBoard FDC 8Disabled 8Enabled 8Auto Disable this function. Set the floppy disk controller automatically. (Default Value) FOnboard Serial Port A 8Auto 83F8/COM1 82F8/COM2 83E8/COM3 82E8/COM4 8Disabled BIOS w ill automatically setup the port A address. (Default Value) Enable onboard Serial port A and address is 3F8. Enable onboard Serial port A and address is 2F8. Enable onboard Serial port A and address is 3E8. Enable onboard Serial port A and address is 2E8. Disable onboard Serial port A. - 41 - BIOS Setup English FOnboard Serial Port B 8Auto 83F8/COM1 82F8/COM2 83E8/COM3 82E8/COM4 8Disabled BIOS w ill automatically setup the port B address. (Default Value) Enable onboard Serial port B and address is 3F8. Enable onboard Serial port B and address is 2F8. Enable onboard Serial port B and address is 3E8. Enable onboard Serial port B and address is 2E8. Disable onboard Serial port B. FSerial Port B Mode This item allows you to determine which Infra Red(IR) function of Onboard I/O chip. 8ASKIR 8IrDa 8Normal Set onboard I/O chip UART to ASKIR Mode. Set onboard I/O chip UART to Normal Mode. (Default Value) FOnboard Parallel Port 8378h 8278h 83BCh 8Auto 8Disabled Set On Board LPT port and address to 378. Set On Board LPT port and address to 278. Set On Board LPT port and address to 3BC. (Default Value) Disable onboard Serial port A. FParallel Port Mode 8EPP 8ECP 8Normal 8Bi-Dir Using Parallel port as Enhanced Parallel Port. Using Parallel port as Ex tended Capabilities Port. Set Bi-direction mode. FEPP Vers ion 8N/A 8EPP 1. 9 8EPP 1. 7 Disable this function. [. . . ] In this case you have to type "A:\> Flash841 7VTX. F4" and then press "Enter". Microsoft(R) Windows98 © Copyright Microsoft Corp 1981-1999 A:\> dir/w Volume in drive A has no label Volume Serial Number is 16EB-353D Directory of A:\ COMMAND. COM 7VTX. F4 FLASH841. EXE 3 file(s) 838, 954 bytes 0 dir(s) 324, 608 bytes free A:\> Flash841 7VTX. F4 (2) Now screen appears the following Flash Utility main menu. Press "Enter", the highlighted item will locate on the model name of the right-upper screen. Right after that, press "Enter" to start BIOS Flash Utility. English - 73 - Appendix English (3) It will pop up a screen and asks "Are you sure to flash the BIOS?" Press [Enter] to continue the procedure, or press [ESC] to quit. [. . . ]