User manual GIGABYTE GA-8SR533P

[. . . ] The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] Disabled Enabled Disable Modem Ring on/wake on Lan function. (Default Value) PME Event Wake Up Set PME as wake up event. Disabled Enabled Disable PME Event wake up function. (Default Value) Power On by Keyboard Any Key Password Disabled Set Keyboard power on by any key. Input password (from 1 to 8 characters) and press Enter to set the Keyboard Power On Password. (Default Value) GA-8SR533P Motherboard - 36 - Power On by Mouse Disabled Enabled Disable this function. (Default Value) Enable Power On by move or click mouse function. English Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to power on system. (Default Value) Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. Month Alarm : Day (of Month) : Time (hh : mm : ss) : NA, 1~12 1~31 (0~23) : (0~59) : (0~59) Power LED in S1 state Blinking Dual/OFF In standby mode(S1), power LED will blink. If use single color LED, power LED will turn off. If use dual color LED, power LED will turn to another color. - 37 - BIOS Setup English PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2002 Award Software PnP/PCI Configurations PCI 4 IRQ Assignment PCI 1/5 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment [Auto] [Auto] [Auto] [Auto] Device(s) using this INT: Display Cntrlr -BUS 1 Dev 0 Func 0 : Move Enter:Select +/-/PU/PD:Value F10:Save F6:Fail-Safe Defaults ESC:Exit F1:General Help Item Help Menu Level F5:Previous Values F7:Optimized Defaults Figure 6: PnP/PCI Configurations PCI 4 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 4. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 4. PCI 1/5 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 1/5. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 1/5. PCI 2 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 2. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 2. PCI 3 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 3. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 3. GA-8SR533P Motherboard - 38 - English PC Health Status CMOS Setup Utility-Copyright (C) 1984-2002 Award Software PC Health Status Reset Case Open Status Case Opened VCORE VCC18 +3. 3V +5V +12V Current System Temperature Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN Speed CPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN Fail Warning : Move [Disabled] No 1. 778V 1. 856V 3. 2V 4. 945V 12. 288V 33°C 68°C 5113 RPM 0 RPM [Disabled] [Disabled] [Disabled] ESC:Exit F1:General Help [Enabled] Clear case open status at next boot Item Help Menu Level [Disabled] Don't reset case open status Enter:Select +/-/PU/PD:Value F10:Save F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 7: PC Health Status Reset Case Open Status Case Opened If the case is closed, "Case Opened" will show "No". If the case have been opened, "Case Opened" will show "Yes". If you want to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and save CMOS, your computer will restart. Current Voltage (V) VCORE / VCC18 / +3. 3V / +5V / +12V Detect system's voltage status automatically. - 39 - BIOS Setup English Current System / CPU Temperature Detect System/CPU temperature automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/System Fan speed status automatically. CPU Warning Temperature Disabled 60°/140°F 70°/158°F 80°/176°F 90°/194°F Don't monitor CPU's temperature. (Default value) Alarm when CPU current temperature over than 60°/140°F. Alarm when CPU current temperature over than 70°/158°F. Alarm when CPU current temperature over than 80°/176°F. Alarm when CPU current temperature over than 90°/194°F. CPU FAN Fail Warning Disabled Enabled Fan Warning function disable. (Default value) Enalbe FAN warning alarm when FAN stops. SYSTEM FAN Fail Warning Disabled Enabled Fan Warning function disable. [. . . ] Connect SPDIF wire to the motherboard. 3. Connect co-axial or optical output to the AC3 decoder. GA-8SR533P Motherboard - 74 - English - 75 - Technical Reference English GA-8SR533P Motherboard - 76 - Revision History Chapter 5 Appendix Picture below are shown in Windows XP (TUCD driver version 2. 11) Appendix A: SiS 645/645DX/648 Chipset Driver Installation A. SiS AGP Driver: Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CDtitle will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup. exe. English 1. [. . . ]