User manual GIGABYTE GA-8VD667K

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to up date the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] Enable onboard Serial port 2 and address is 2E8. Disable onboard Serial port 2. - 39 - BIOS Setup English C UARTMode Select MThis feature allows you to determine which Infra Red(IR) function of Onboard I/O chip) 8ASKIR 8IrDA 8Normal Set onboard I/O chip UART to ASKIR Mode. Set onboard I/O chip UART to IrDA M ode. Set onboard I/O chip UART to Normal Mode. (Default Value) C UR2 Duplex Mode(When UART Mode Select i s set [ASKIR or IrDA or SCR]) MThis feature allows you to select the IR modes. (Default Value) IR Function Duplex Full. C Onboard Parallel port MThis feature allows you to select from a given set of param eters if the parallel port uses the onboard I/O controller. 8378/IRQ7 8278/IRQ5 8Disabled 83BC/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value) Enable onboard LPT port and address is 278/IRQ5. Enable onboard LPT port and address is 3BC/IRQ7. CParallel Port Mode MThis feature allows you to connect with an advanced print via the port mode it supports. 8SPP 8EPP 8ECP 8ECP+EPP Using Parallel port as Standard Parallel Port. (Default Value) Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. Using Parallel port as ECP & EPP mode. CECP Mode Use DMA(When Parallel Port Mode is set [ECP or ECP+EPP]) 83 81 Set ECP Mode Use DMA to 3. (Default Value) Set ECP Mode Use DMA to 1. CGame Port Address 8201 8209 8Disabled Set Game Port Address to 201. (Default Value) Set Game Port Address to 209. Disable this function. GA-8VD667K Motherboard - 40 - English CMidi Port Address 8300 8330 8Disabled Set Midi Port Address to 300. Set Midi Port Address to 330. (Default Value) Disable this function. CMidi Port IRQ 85 810 Set Midi Port IRQ to 5. (Default Value) GA-8VD667K Motherboard - 41 - English Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2002 Award Software Power Management Setup ACPI Suspend Type Power LED in S1 State Soft-Off by PWR_BTTN PM E Event Wake Up ModemRingOn Resume by Alarm x Date (of Month) Alarm x Time (hh:nn:ss) Alarm Power On By M ouse Power On By Keyboard x KB Power ON Password AC Back Function S1(POS) Blinking Instant-Off Enabled Enabled Disabled Everyday 000 Disabled Disabled Enter Soft-Off [S3] Set suspend type to Suspend to RAM under ACPI OS Set suspend type to Power On Suspend under ACPI OS Menu Level u [S1] Item Help higf: M ove Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults Figure 5: Power Management Setup F1:General Help F7:Optimized Defaults C ACPI Suspend Type This option will not be shown or not be available if you are using a CPU with the locked ratio. 8S1(POS) 8S3(STR) Set ACPI suspend type to S1. (Default Value) Set ACPI suspend type to S3. C Power LED in S1 State 8Blinking 8Dual/Off In standby mode(S1), power LED will blink. If use single color LED, power LED will turn off. If use dual color LED, power LED will turn to another color. - 42 - BIOS Setup English C Soft-off by PWR_BTTN 8Instant-off Press power button then Power off instantly. Enter suspend if button is pressed less than 4 sec. C PMEEvent Wake Up MWhen set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state. [. . . ] Address: Postbus 1385, 5602 BJ, Eindhove n, The Netherlands Tel: +31 40 290 2088 Fax: +31 40 290 2089 E-mail:info@giga-byte. nl Web Address: http://www. giga-byte. nl -- China Shanghai Office Te l: 86-21-64737410 Fax: 86-21-64453227 Web Address: www. gigabyte. com. cn GuangZhou Office Te l: 86-20-87586273 Fax: 86-20-87544306 Web Address: www. gigabyte. com. cn Beijing Office Te l: 86-10-82856054 86-10-82856064 86-10-82856094 Fax: 86-10-82856575 Web Address: www. gigabyte. com. cn E-mail:bjsupport@gigabyte. com. cn Chengdu Office Te l: 86-28-85236930 Fax: 86-28-85256822 Web Address: www. gigabyte. com. cn English -- Taiwan Gigabyte Technology Co. , Ltd. Address: No. 6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, Taiwan, R. O. C. TEL: 886 (2) 8912-4888 (50 line s) FAX: 886 (2) 8912-4004 E-mail:english@gigabyte. com. tw Web Address: http://www. gigabyte. com. tw -- USA G. B. T. Address: 17358 Railroad St, City of Industry, CA 91748. [. . . ]