User manual GIGABYTE GA-J1900N-D2H

[. . . ] Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. „„ In order to assist in the use of this product, carefully read the User's Manual. „„ For product-related information, check on our website at: http://www. gigabyte. com Identifying Your Motherboard Revision The revision number on your motherboard looks like this: "REV: X. X. " For example, "REV: 1. 0" means the revision of the motherboard is 1. 0. [. . . ] This item is configurable only when Serial Port is set to Enabled. (Default: Auto) && Change Settings && Device Mode Enables or disables the onboard parallel port. (Default: Enabled) Allows you to configuration the IRQ settings for the parallel port. This item is configurable only when Parallel Port is set to Enabled. (Default: Auto) Selects an operating mode for the onboard parallel (LPT) port. This item is configurable only when Parallel Port is set to Enabled. Options are: Standard Parallel Port Mode (Default), EPP Mode (Enhanced Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode. - 19 - && ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. && Case Open && Reset Case Open Status Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Open", otherwise it will show "Close. " To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. Disabled   Keeps or clears the record of previous chassis intrusion status. (Default) Enabled   Clears the record of previous chassis intrusion status and the Case Open field will show "Close" at next boot. `` H/W Monitor && CPU Temperature (DTS)/System Temperature && CPU/System Fan Speed Displays current CPU/system temperature. This item is configurable only when DTS is enabled. (Default: 100 C) Allows you to set the CPU temperature threshold. If the CPU temperature reaches this value, the CPU frequency will be automatically reduced. This item is configurable only when DTS is enabled. (Default: 85 C) `` IDE Configuration && Serial-ATA (SATA) && SATA Mode Enables or disables the integrated SATA controllers. (Default: Enabled) && Serial-ATA Port 0/Serial-ATA Port 1 Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode. This item is configurable only when Serial-ATA(SATA) is set to Enabled. IDE Mode  D  isables RAID for the SATA controllers and configures the SATA controllers to IDE mode. AHCI Mode  C  onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) Enables or disables each SATA port. [. . . ] We believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change without notice and should not be construed as a commitment by GIGABYTE. Our Commitment to Preserving the Environment In addition to high-efficiency performance, all GIGABYTE motherboards fulfill European Union regulations for RoHS (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment) environmental directives, as well as most major worldwide safety requirements. To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, GIGABYTE provides the following information on how you can responsibly recycle or reuse most of the materials in your "end of life" product. Restriction of Hazardous Substances (RoHS) Directive Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). [. . . ]