User manual GIGABYTE GA-K8N

[. . . ] GA-K8N AMD Socket 754 Processor Motherboard User's Manual Rev. 1002 12ME-K8N-1002 Copyright © 2003 GIGABYTE TECHNOLOGY CO. , LTD Copyright by GIGA-BYTE TECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the property of their respective owners. Notice Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] (Default Value) English Modem Ring On You can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake up" when the M/B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake up". An incoming call via modem awakes the system from its soft-off mode. Disabled Enabled Disable Modem Ring on function. (Default Value) S3 Resume by USB Device You can resume the system from USB device. (Default Value) Enable this function. Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to power on system. (Default Value) Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. Day of Month Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) - 47 - BIOS Setup K8n_1001_b. p65 47 2003/9/19, ¤U¤È 05:14 English Power On By Mouse Disabled Double Click Disabled this function. (Default value) Double click on PS/2 mouse left button to power on the system. Power On By Keyboard This feature allows you to set the method for powering-on the system. The option "Password" allows you to set up to 5 alphanumeric characters to power-on the system. The option "Keyboard 98" allows you to use the standard keyboard 98 to power on the system. Password Disabled Keyboard 98 Enter from 1 to 5 characters to set the Keyboard Power On Password. (Default value) If your keyboard have "POWER Key" button, you can press the key to power on the system. KB Power ON Password When "Power On by Keyboard" set at Password, you can set the password here. Enter Input password (from 1 to 5 characters) and press Enter to set the Keyboard Power On password. AC BACK Function Soft-Off Full-On When AC-power back to the system, the system will be in "Off" state. (Default Value) When AC-power back to the system, the system always in "On" state. GA-K8N Motherboard - 48 - K8n_1001_b. p65 48 2003/9/19, ¤U¤È 05:14 PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2003 Award Software PnP/PCI Configurations PCI 3 IRQ Assignment PCI 4 IRQ Assignment PCI 1/PCI 5 IRQ Assignment PCI 2 IRQ Assignment [Auto] [Auto] [Auto] [Auto] Item Help Menu Level u English h i g f: Move Enter:Select +/-/PU/PD: Value F10: Save ESC:Exit F5: Previous Values F6: Fail-Safe Defaults Figure 7: PnP/PCI Configurations F1: General Help F7: Optimized Defaults PCI 3 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 3. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 3. PCI 4 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 4. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 4. PCI 1/PCI 5 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 1/PCI 5. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 1/PCI 5. PCI 2 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 2. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 2. - 49 - BIOS Setup K8n_1001_b. p65 49 2003/9/19, ¤U¤È 05:14 English PC Health Status CMOS Setup Utility-Copyright (C) 1984-2003 Award Software PC Health Status Vcore DDR25V +3. 3V +12V Current CPU temperature Current CPU FAN Speed Current SYSTEM FAN Speed CPU Warnng Temperature CPU FAN Fail Warning SYSTEM FAN Fail Warning 1. 566V 2. 800V 3. 232V 11. 668V 25o C 3125 RPM 0 RPM [Disabled] [Disabled] [Disabled] Item Help Menu Level u h i g f: Move Enter:Select +/-/PU/PD: Value F10: Save ESC:Exit F5: Previous Values F6: Fail-Safe Defaults Figure 8: PC Health Status F1: General Help F7: Optimized Defaults Current Voltage (V) Vcore / DDR25V / +3. 3V / +12V Detect system's voltage status automatically. Current CPU Temperature Detect CPU temperature automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/SYSTEM Fan speed status automatically. GA-K8N Motherboard - 50 - K8n_1001_b. p65 50 2003/9/19, ¤U¤È 05:14 CPU Warning Temperature Alarm When current temperature over than the selected temperature. 60 o C / 140 o F 70 o C / 158 o F 80 o C / 176 o F 90 o C / 194 o F 8Disabled Monitor CPU Temp. Don't monitor current temperature. (Default value) English CPU FAN Fail Warning Disabled Enabled Fan Warning Function Disable. [. . . ] No Check if the memory install properly into the DIMM slot. Yes Insert and push the memory module vertically into the DIMM slot. Failure has been excluded. Insert the VGA card. Then plug in ATX power cable and turn on the system. A GA-K8N Motherboard - 86 - K8n_1001_a. p65 86 2003/9/19, ¤U¤È 05:13 English A The problem could be caused by power supply, CPU, memory or CPU/memory socket itself. Is memory LED on and CPU fan running? No Yes Failure has been excluded. No Check if there is display. Perhaps your VGA card / VGA slot or monitor is defective. Yes Turn off the system. [. . . ]