User manual GIGABYTE GA-Z68XP-UD3R

[. . . ] 1301 12ME-Z68XP3R-1301R Motherboard GA-Z68XP-UD3R Motherboard GA-Z68XP-UD3R May 27, 2011 May 27, 2011 Copyright © 2011 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] (Default) Full-On The system is turned on upon the return of the AC power. Memory The system returns to its last known awake state upon the return of the AC power. ErP Support Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled, the following four functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. (Note) Supported on Windows 7/Vista operating system only. - 54 - BIOS Setup 2-8 PC Health Status CMOS Setup Utility-Copyright (C) 1984-2011 Award Software PC Health Status Reset Case Open Status Case Opened Vcore DDR15V +12V Vcc3 Vcc Vtt Current System Temperature Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN2 Speed Current POWER FAN Speed Current SYSTEM FAN1 Speed CPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN2 Fail Warning POWER FAN Fail Warning SYSTEM FAN1 Fail Warning [Disabled] No 1. 172V 1. 536V 11. 779V 3. 205V 5. 042V 1. 076V 30oC 47oC 3375 RPM 0 RPM 0 RPM 0 RPM [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save Item Help Menu Level Enter: Select higf: Move F5: Previous Values ESC: Exit F1: General Help F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2011 Award Software PC Health Status CPU Smart FAN Control x Slope PWM CPU Smart FAN Mode [Normal] 1. 75 PWM value /oC [Auto] Item Help Menu Level Enter: Select higf: Move F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Openedfieldwillshow"No"atnextboot. (Default:Disabled) Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. Ifthesystemchassiscoverisremoved, thisfieldwillshow"Yes", otherwiseitwillshow"No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. - 55 BIOS Setup Case Opened Current Voltage(V) Vcore/DDR15V/+12V/Vcc3/Vcc/Vtt Current System/CPU Temperature Current CPU/SYSTEM/POWER FAN Speed (RPM) CPU Warning Temperature Displays current CPU/system/power fan speed. Displays current System/CPU temperature. CPU/SYSTEM/POWER FAN Fail Warning Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS will emit warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF. Allows the system to emit warning sound if the CPU/system/power fan is not connected or fails. Check the fan condition or fan connection when this occurs. (Default: Disabled) Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed. Normal Allows the CPU fan to run at different speeds according to the CPU temperature. You can adjust the fan speed with EasyTune based on your system requirements. (Default) Silent Allows the CPU fan to run at slow speeds. Manual Allows you to control the CPU fan speed under the Slope PWM item. Disabled Allows the CPU fan to run at full speeds. CPU Smart FAN Control Slope PWM CPU Smart FAN Mode AllowsyoutocontroltheCPUfanspeed. ThisitemisconfigurableonlywhenCPU Smart FAN Control is set to Manual. Options are: 0. 75 PWM value /oC ~ 2. 50 PWM value /oC. SpecifieshowtocontrolCPUfanspeed. ThisitemisconfigurableonlywhenCPU Smart FAN Control is enabled. Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU fan control mode. (Default) Voltage Sets Voltage mode for a 3-pin CPU fan. Note: The Voltage mode can be set for a 3-pin CPU fan or a 4-pin CPU fan. [. . . ] Connect the ATX main power cable and the 12V power cable. Turn on the power to start the computer. Theproblemisverifiedandsolved. Make sure the graphics card is securely seated in the expansionslotandpowerconnectorsarefirmlyattached. A (Continued. . . ) Appendix - 116 - A When the computer is turned on, is the CPU cooler running?Yes No The power supply, CPU or CPU socket might fail. Theproblemisverifiedandsolved. No The graphics card, expansion slot, or monitor might fail. Check if there is display on your monitor. [. . . ]