User manual GIGABYTE GA-Z77-D3H

[. . . ] The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, orpublished in any form or by any means without GIGABYTE's prior written permission. [. . . ] If the OS does not provide support, all sharable ports won't work. 0 ports are routed to the EHCI controller and the xHCI controller is turned off. If this item is set to Disabled, the HS Port #1/2/3/4 Switchable and xHCI Streams items below will become unconfigurable. 0 device attached on this port with Super-Speed capability is visible to xHCI controller. 0 device attached on this port with Super-Speed capability will function as High-Speed. 0 Streams support, devices may require UASP class driver updates from UASP driver vendors to be fully compatible with Intel USB 3. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. Specifes the frst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card, or the onboard graphics. Auto Lets BIOS automatically configure this setting. (Default) IGFX Sets the onboard graphics as the first display. PEG Sets the PCI Express graphics card on the PCIEX16 slot as the first display. PCI Sets the graphics card on the PCI slot as the first display. enables or disables the onboard graphics function. (Default: Auto) Allows you to set the onboard graphics memory size. (Default: 64M) Allows you to allocate the DVMT memory size of the onboard graphics. This item is configurable only when an SSD is installed. (Default: Disabled) & Internal Graphics & Internal Graphics Memory Size & DVMT Total Memory Size & Intel(R) Rapid Start Technology & Legacy USB Support & XHCI Hand-off & EHCI Hand-off Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) Displays a list of connected USB mass storage devices. [. . . ] Or go to the Support & Downloads\Technical Support page to submit your question. Our customer service staff will reply you as soon as possible. Appendix - 98 - 5-3-3 Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. We believe that the information contained herein was accurate in all respects at the time of printing. [. . . ]