User manual GIGABYTE GA-Z97X-GAMING GT

[. . . ] GA-Z97X-Gaming GT User's Manual Rev. 1001 12ME-Z97XGGT-1001R Motherboard GA-Z97X-Gaming GT Motherboard GA-Z97X-Gaming GT Apr. 25, 2014 Copyright © 2014 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. [. . . ] All USB 3. 0 devices function as High Speed devices regardless of xHCI software support/availability. Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. Enables or disables the onboard audio LED. (Default: Enabled) && Audio LED && USB DAC Power && Intel Processor Graphics Enables or disables the power for the USB DAC connector on the back panel. For a USB DAC that has independent power, set this item to Disabled. (Default: Enabled) Enables or disables the onboard graphics function. (Default: Enabled) Allows you to set the onboard graphics memory size. (Default: 64M) && Intel Processor Graphics Memory Allocation && DVMT Total Memory Size Allows you to allocate the DVMT memory size of the onboard graphics. (Default: MAX) && Intel(R) Rapid Start Technology && Legacy USB Support Enables or disables Intel® Rapid Start Technology. (Default: Disabled) Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) BIOS Setup - 58 - && EHCI Hand-off && USB Storage Devices Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. Set to Enabled to ensure proper device functionality when chaining two KVM switches. (Default: Disabled) && Two Layer KVM Switch && OnBoard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. `` SATA Configuration && Integrated SATA Controller && SATA Mode Selection Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Express SRIS capabilities Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. IDE  Configures the SATA controller to IDE mode. RAID  Enables RAID for the SATA controller. AHCI  C  onfigures the SATA controllers to AHCI mode. [. . . ] With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. Appendix - 128 - FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]