User manual GIGABYTE GS-R114L

[. . . ] GS-R114L 1U Rack Mount Server System Installation Guide Intel® Pentium Prescot LGA775 Processor Serverboard Rev. 1. 1 25A080-01140-F00 GS-R114L Rack Mount Server Table of Content Safety, Care and Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Contents Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 31/2 inch AT-type high-density drive; 360K byte capacity 31/2 inch AT-type high-density drive; 1. 2M byte capacity 31/2 inch double-sided drive; 720K byte capacity 31/2 inch double-sided drive; 1. 44M byte capacity. 31/2 inch double-sided drive; 2. 88M byte capacity. 1. 2MB, 31/2 in. 1. 44M, 3 1/2 in. 2. 88M, 3 1/2 in. Note: The 1. 25MB, 31/2 reference a 1024 byte/sector Japanese media format. The 1. 25MB, 31/2 diskette requires 3-Mode floppy-disk drive. Hard Disk Pre-Delay This item provides function for user to add a delay before the first access of a hard disk by BIOS. Some hard disks hang if accessed before they have initialized themselves. The delay ensures the hard disk initialized after powering up, prior to being accessed. Options Disabled, 3 Seconds, 6 Seconds, 9 Seconds, 12 Seconds, 21 Seconds, 30Seconds. Default vaule is Disabled. IDE Primary Master, Slave / Secondary Master, Slave, Parallel ATA The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. 29 GS-R114L Rack Mount Server TYPE 1-39: Predefined types. (Default Vaules) CD-ROM: Use for ATAPI CD-ROM drives or double click [Auto] to set all HDD parameters automatically. ATAPI Removable: Removable disk drive is installed here. Multi-Sector Transfer This field displays the information of Multi-Sector Transfer Mode. Disabled: The data transfer from and to the device occurs one sector at a time. Auto: The data transfer from and to the device occurs multiple sectors at a time if the device supports it. LBA Mode This field shows if the device type in the specific IDE channel support LBA Mode. Enable this function to max imize the IDE data transfer rate. This field shows the information of Teansfer Mode. This filed displays the DMA mode of the device in the specific IDE channel. 32-Bit I/O Transfer Mode Ultra DMA Mode 30 BIOS Setup Advanced Processor Options Figure 1-1: Advanced Processor Option Advanced Processor Option This category includes the information of CPU Speed, Processor ID, Processor L2 Cache. [. . . ] Auto Run window Intel LAN Drivers 2. Click "Install Base Driver" item. 1. Click "Intel LAN Driver" item. (1) (2) Installation Wizard License Agreement 3. Click "Next". 4. Click "I Accept". (3) 60 (4) Driver Installation Install Option Start Installation 5. Click "Next". 6. Click "Install". (5) (6) Installation Progress Installation Complete Starting Installation 8. Click "Install". (7) (8) 61 GS-R114L Rack Mount Server C. Intel Host RAID Driver Installation Installation Procedures: 1. The CD auto run program starts, Double click on "Intel Host RAID Driver" to make a driver disk. Select a folder refering to your operating system. [. . . ]