User manual GIGABYTE GS-R22T81

[. . . ] GIGABYTE GS-R22T61-RH/GS-R22T81-RH 2U Rack Mount Server Service Guide Dual Intel® Xeon LGA1366 Processor Serverboard Rev. 1. 0 Preface Before using this information and the product it supports, please read the following general information. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided for GIGABYTE's "global" product offering. To better fit local market requirements and enhance product competitiveness, your regional office MAY have decided to extend the functionality of a machine (e. g. [. . . ] Turbo Mode can be engaged with SMT (Simultanceous Multi Threading) enabled and 1 to 4 cores active and is not limited to only a single core or logical processor. Enable ACPI C-State (C0, C1/C1E, C3, C6 and C7). Desire state for the Nehalem core C3 state include in the CST as ACPI C3 state. (Default setting) C2 Disabled Desire state for the Nehalem core C2 state include in the CST as ACPI C2 state. Desire state for the Nehalem core C6 state include in the CST as ACPI C3 56 T State Enabled Disabled CPU C State Enabled Disabled CPU C1E Enabled Disabled C3 OS ACPI C3 Report CPU C6 Report Enabled GS-R22T61-RH/GS-R22T81-RH Rack Mount Server state. (Default setting) Disabled Disable CPU C6 Report. Desire state for the Nehalem core C7 state include in the CST as ACPI C3 state. (Default setting) Disabled Disable CPU C7 Report. CPU C7 Report Enabled Package C State Limit Desired state for the C-State package limit. Options C0, C1 State, C3 State, C6 State, C7 State, No Limit. The default setting is C3 State. ACPI MWAIT extensions Enabled Disabled CST using MWAIT extension isenabled for OSPM use. (Default setting) Disable ACPI MWAIT extensions. 57 BIOS Setup Memory Configuration 58 GS-R22T61-RH/GS-R22T81-RH Rack Mount Server System Memory/Extended Memory/Memory Frequency/DIMM Status These category is display-only which is determined by POST (Power On Self Test) of the BIOS. Memory Reset Yes Select `Yes', system will clear the memory error status. After rebooting system, the Memory Reset item will set to `No' automatically. (Default setting) Select `Manual" will pops up sub-menu for configuration. (Default setting) No Manual Auto Memory Control Settings Memory RAS Mode Identify the Memory RAS mode. Memory Frequency Select the desire value of Memory frequency. Options available: Auto, DDR-3 800, DDR-3 1066, and DDR-3 1333. Change Interleave setting Change the interleave setting. Options available: 1-way, 2-way, 3-way, 4-way, and 6-way. Rank Interleave setting Configure interleave setting. Options available: 1-way, 2-way, and 4-way. 59 BIOS Setup Advanced Chipset Configuration 60 GS-R22T61-RH/GS-R22T81-RH Rack Mount Server Figure 2-3-1: Intel VT for Directed I/O (VT-d) 61 BIOS Setup Intel VT for Directed I/O (VT-d) Interrupt Remapping Enabled Disabled Enabled Disabled Enable Interrupt Remapping. (Default setting) Disable Interrupt Remapping. (Default setting) Disable PassThrough DMA. Enable VT-d support for Port 1~Port 10 ports through ATSR structures in ACPI Tables. (Default setting) Disable VT-d for Port1~Port 10. Coherency Support ATS Enabled Disabled Enabled Disabled Enabled Disabled PassThrough DMA VT-d for Port1~Port 10 Advanced Chipset Control Main Menu Options Course Grain Clocking Gating Enabled Disabled Enable Course Grain Clocking Gating. (Default setting) Enable configuration mapped accesses to the I/OAT configuration sapce. [. . . ] PS/2 Mouse Boot Summary Screen: PS/2 Mouse installed. nnnn kB Extended RAM Passed Where nnnn is the amount of RAM in kilobytes successfully tested. nnnn Cache SRAM Passed Where nnnn is the amount of system cache in kilobytes successfully tested. nnnn kB Shadow RAM Passed Where nnnn is the amount of shadow RAM in kilobytes successfully tested. [. . . ]