User manual GIGABYTE GZ-X2

[. . . ] Caution Failure to wear gloves during installation of computer products may cause damage to personnel and devices. Incorrect connector installation may possibly burn out the motherboard and other components. Be sure to observe the instructions on installation in the manual. Contents 1 Components Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1-1 Chassis's Internal Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 4 1-2 Side Panel Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1-3 Front and Rear Panel Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installation Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4-1 Installation of Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4-2 Installation of Motherboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4-3 Installation of Interface Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4-4 Installation of Front I/O Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4-5 Chassis's Internal Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4-6 Installation of 5. 25" Front Device Bay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Any loss arising from nonobservance of the proper operation provided is not covered by the warranty. Different motherboards may have different installation positions. For detailed instructions, please refer to the instructions supplied by the motherboard manufacturer. The front panel consists of (1) Two USB 2. 0 ports, one IEEE 1394, and one High Definition Audio connector. (2) Basic chassis power switch control cable kit Required tool: None (1) Two USB 2. 0 ports, one IEEE 1394, and one High Definition Audio connector. 4-4-1 Insert the USB2. 0 connector into the corresponding socket on the motherboard. USB 2. 0 Connector Pin 1 2 3 4 5 Definition Power Power USB DxUSB DyUSB Dx+ Pin 6 7 8 9 10 Definition USB Dy+ GND GND USB Over Current English English English 4-4-2 Insert the IEEE 1394 connector into the corresponding socket on the motherboard. Please refer to the instructions supplied by the motherboard manufacturer and make sure the correct type of connector prior to installation. a. IEEE1394 Connector A Pin 1 2 3 4 5 Pin 1 2 3 4 5 Pin 1 2 3 4 5 6 7 8 Definition TPA+ TPAGND GND TPB+ Definition TPA+ TPAGND GND TPB+ Definition +12V +12V TPA+ TPAGND GND TPB+ TPBPin 6 7 8 9 10 Pin 6 7 8 9 10 Pin 9 10 11 12 13 14 15 16 Definition TPB+12V +12V GND Definition TPB+12V +12V GND Definition +12V +12V TPA1+ TPA1GND TPB1+ TPB1- Deutsch b. IEEE1394 Connector C English 11 English 4-4-3 Attach the HD Audio connector to the pin located on the motherboard. Pin 1 2 3 4 5 6 7 8 9 10 Definition MIC2_L GND MIC2_R -ACZ_DET Line2_R FSENSE1 FAUDIO_JD No Pin LINE2_L FSENSE2 English Pin 1 2 3 4 5 Definition MIC GND MIC Power NC Line Out (R) Pin 6 7 8 9 10 Definition NC NC NO Pin Line Out (L) NC English (2) Basic chassis power switch control cable kit. English Follow the connectors listed below for installation (see the figure below). Connector Speaker Reset SW Power SW POW LED+ POW LEDH. D. D. LED Color Yellow(+) / Black(-) Blue(+) / White(-) Orange(+) / White(-) Green White Red(+) / White(-) Deutsch Deutsch Be sure to remember that different motherboards may have different installation positions. For detailed instructions, please refer to the instructions supplied by the motherboard manufacturer. 4-5 Chassis's Internal Structure The Poseidonis equipped with dual 12cm silent fans (front and rear). [. . . ] LED Color Yellow(+) / Black(-) Blue(+) / White(-) Orange(+) / White(-) Green White Red(+) / White(-) Deutsch Deutsch Be sure to remember that different motherboards may have different installation positions. For detailed instructions, please refer to the instructions supplied by the motherboard manufacturer. 4-5 Chassis's Internal Structure The Poseidonis equipped with dual 12cm silent fans (front and rear). Required tool: None English 4-5-1 Plug the front fan 3-pin power connector into the fan power connector of the motherboard system. 12 English 4-6 Installation of 5. 25" Front Device Bay The installation of 5. 25" CD-ROM is also intended for installation of general 5. 25" front device bay. Required tool: None 4-6-1 Remove the front panel (see Step 1-3-1 on Page 7) and take off the 5. 25" internal metallic panel. English 4-6-2 Slide the 5. 25" CD-ROM into the drive. English 4-6-3 Refer to the installation order illustrated in the left figure and secure the 5. 25" CD-ROM by controlling the latch. [. . . ]