User manual GIGABYTE ISOLO 230

[. . . ] iSolo 230 English User's Manual GZ-AA3CBI-SNS/SNB/SNG English Thank you for purchasing GIGABYTE Tech. is dedicated to the integration of casing water/air-cooling solution technology to provide users with the most optimal solution for thermal dissipation. [. . . ] Be sure to observe the instructions in the installation manual. 2 English Table of Contents 1. Components Introduction 1-1 Casing's Internal Structure 1-2 Front, Rear, and Left Side Panel Structure 1. 3 Removal of Side and Front Panel 2. Installation Instruction 4-1 Installation of Power Supply 4-2 Installation of Motherboard 4-3 Installation of Add-on Card 4-4 Installation of Front Multi-Media I/O port 4-5 Connection of Fan Power Cables 4-6 Installation of 5. 25" Front Device Bay 4-7 Installation of 3. 5" Front Device Bay 4-8 Installation of 3. 5" Internal Device Bay 4-9 Foot Supports 4-10 Liquid Cooling System Support 4-11 Recommended Cooling Products 3 4 5 5 6 7 8 8 8 9 10 11 11 12 12 13 13 14 3 English 1. Components Introduction 1-1 Casing's Internal Structure Power Supply Bay PCI Tool-Free Fastener 5. 25" Front Device Bay Motherboard tray 3. 5" Front Device Bay 3. 5" Internal Device Bay Accessory Box Accessory Box (Refer to the figures below for the attachments in the accessory box) Securing Runner x 6 Copper Stand Off x9 Motherboard Securing Screw x 9 Power Supply Securing Screw x 4 Large Wire Clamp x2 Mini Wire Clamp x3 Magnet Ring x 1 Dust Remover Cloth Front Cable Kit (Refer to the figures below for the cable connectors) USB 2. 0 Audio Set (HD & AC'97) IEEE1394 (Multi-connectors) 3-Pin Fan Connector Power SW / HDD LED 4-Pin Power LED / Speaker Connector Connector 4 English 1-2 Front, Rear, and Left Side Panel Structure a) Left Side Panel b) Front Panel Ventilated Mesh Side Panel Kit Left Side Panel c) Rear Panel Rear Fan Multi-Media I/O port Power Switch HDD LED LCS Tube Outlets 1-3 Removal of Side and Front Panels 1-3. 1 To remove side panels: 1-3. 1a Remove the 4 thumb screws at the rear of the side panel, and detach the side panels. 1-3. 2 To remove front panel: 1-3. 2a Remove the left and right side panels, release the 4 clamps that hold the front panel onto the chassis. 5 English 2. Feature -High Quality Design Innovative sleek dual-tone design coupled with sophisticated yet simple, precise workmanship. Illuminated and atmospherically-soothing backlight for a post-modern classy impression. -Complete Support Complete front panel multi-media support, include 2 x USB 2. 0, 1 x IEEE1394, 1 x audio set (HD & AC97) Full Support of Gigabyte Tech. thermal solution LCS and Air cooling products lines Support ATX / Micro ATX / Flex ATX motherboard. -Integration of Cooling Technology Intergrated Ventilated Mesh side panel. -Convenience of assembly Internal Cable Management ­ provides users with a clean assembly environment. Tool-free installation design. 6 English 3. Specifications Model Case Type Size Front Bezel Material Color Side panel Body material Net weight 5. 25" drive bay (External) 3. 5 drive bay (External) 3. 5 drive bay (Internal) Expansion slots Form factor System Fan (front) System Fan (rear) I / O Ports GZ-AA3CBI-SNS/SNB/SNG Middle Tower 200 x 440 x 494mm (W x H x D) Aluminum & Steel Mesh Silver / Black / Metallic Grey Ventilated Mesh 0. 7mm SECC 8. 8 KG 5 2 3 7 ATX / Micro ATX / Flex ATX One 120mm silent fan One 120mm silent fan USB2. 0 x 2 / IEEE1394 x 1 / Audio Set x 1(HD-AC'97) 7 English 4. Installation Instruction Please follow the reference sections in order for installation 4-1 Installation of Power Supply To facilitate the installation, it is recommended to place the chassis upright on the table. Required Tools: Power supply securing screw x 4; Cross screwdriver. Remove side panel (see step 1-3. 1 on page 5). Place the power supply into the power supply bay. 4-1. 1 4-1. 2 Use the 4 x securing screws to secure the power supply to the rear of the chassis. 4-2 Installation of Motherboard The iSolo 230 can support ATX / Micro ATX / Flex-ATX motherboards. Please confirm the dimension and specifications of the motherboard before installation. Required Tools: Cross screwdriver, Copper stand offs x 9 and Motherboard screws x 9. According to the motherboard specifications, select the proper screw holes. [. . . ] Slide in the HDD and lock the internal latch to secure the HDD. 4-9 Foot Supports The iSolo 230 is supplied with four high-end skid-proof foot supports for ensuring the casing is firmly seated on the holding surface. 4-10 Liquid Cooling System Support The iSolo 230 casing can fully support the GIGABYTE 3D Galaxy Liquid Cooling System (it also supports majority of the liquid cooling systems available commercially). While installing the liquid cooling system, please refer to the manual provided with the liquid cooling system. 13 English 4-11 Recommended Cooling Products The iSolo 230 is recommended to be used with GIGABYTE Cooling products. 14 [. . . ]