User manual GIGABYTE LUXO X10

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GIGABYTE LUXO X10. We hope that this GIGABYTE LUXO X10 user guide will be useful to you.

Lastmanuals help download the user guide GIGABYTE LUXO X10.


Mode d'emploi GIGABYTE LUXO X10
Download
Manual abstract: user guide GIGABYTE LUXO X10

Detailed instructions for use are in the User's Guide.

[. . . ] It can be switched between AGP 2X (3. 3V) or 4X(1. 5V) mode by adjusting the jumper. The factory default for this card is 2X(3. 3V). If you install this card in GA8IDX3 series (or any AGP 4X only) motherboards without switching the jumper to 4X mode (1. 5V), it will burn the motherboard. Example 2: ATi Rage 128 Pro (Power Color) & SiS 305 golden finger is compatible with 2X/4X mode AGP slot, but it supports 2X(3. 3V) only. [. . . ] Note that there will not be any warning message if the drive installed is 360 K. Boot Up NumLock On Off Keypad is number keys. (Default value) Keypad is arrow keys. Password Check This category allows you to limit access to the system and Setup, or just to Setup. System Setup The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt. (Default value) MPS Version Control For OS (Support Multi Processor Specification revision 1. 4) 1. 4 1. 1 Support MPS Version 1. 4 . (Default Value) Support MPS Version 1. 1. HDD S. M. A. R. T. Capability Enabled Disabled Enabled HDD S. M. A. R. T. (Default value) 29 LUXO X10 Series Motherboard Advanced Chipset Features CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Advanced Chipset Features Configure DRAM Timing CAS Latency Time Active to Precharge Delay DRAM RAS# to CAS# Delay DRAM RAS# Precharge Refresh Mode Select DRAM Data Integrity Mode DRAM Read Thermal Mgmt Delay Transaction AGP Aperture Size(MB) Delay Prior to Thermal SPD 3 6 3 3 15. 6usec Non-ECC Disable Enable 64 16Min Item Help Menu Level : Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 4: Advanced Chipset Features Configure DRAM Timing SPD Manual Set Configure DRAM Timing Control by SPD. (Default value) Set SConfigure DRAM Timing Control by Manual. CAS latency Time 3 2 For Slower SDRAM DIMM module. (Default Value) For Fastest SDRAM DIMM module. Active to Precharge Delay 5 6 7 Set active to Precharge delay timing is 5 clk. Set active to Precharge delay timing is 6 clk. (Default value) Set active to Precharge delay timing is 7 clk. 30 BIOS Setup SDRAM RAS# to CAS# delay 3 2 Set SDRAM RAS# to CAS# delay 3 SCLKs. (Default value) Set SDRAM RAS# to CAS# delay 2 SCLKs. SDRAM RAS# Precharge 3 2 Set SDRAM RAS# Precharge Time to 3. (Default value) Init Display First PCI AGP Set Init Display First to PCI Slot. (Default value) AC97 Audio Auto BIOS will automatically detect onboard AC97 Audio or Creative CT5880 audio. (Default value) Disabled Disabled AC97 Audio. AC97 Modem Auto Disabled Bios will automatically detect onboard AC97 Modem. (Default value) Disabled AC97 Modem. Power On by Mouse Disabled Mouse Click Disabled this function. (Default value) Power On by Mouse click. Power On by Keyboard Password Disabled Keyboard 98 Enter from 1 to 5 characters to set the Keyboard Power On Password. (Default value) If your keyboard have "POWER Key" button, you can press the key to power on your system. 36 BIOS Setup KB Power ON Password Enter Input password (from 1 to 5 characters) and press Enter to set the Key board Power On Password. Onboard FDC Controller Enabled Disabled Enable onboard FDC port. (Default value) Disable onboard FDC port. Onboard Serial Port 1 Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled BIOS will automatically setup the port 1 address. Enable onboard Serial port 1 and address is 3F8. (Default value) Enable onboard Serial port 1 and address is 2F8. Enable onboard Serial port 1 and address is 3E8. Enable onboard Serial port 1 and address is 2E8. [. . . ] They may spend quite a lot of time and money to study, try and use many different hardware and software tools to do "overdrive". And even with these technologies, they still learn that it's quite a risk because the safety and stability of an "overdrive" system is unknown. Now everything is different because of a Windows overdrive utility EasyTuneIII--announced by Gigabyte. This utility has totally changed the gaming rule of "overdrive". [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE LUXO X10

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE LUXO X10 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag