User manual GIGABYTE M6980X

[. . . ] The combination of 6000dpi, 1000rps report rate and 30G acceleration provide a very accurate basis for gaming. GHOST™ Macro Engine of 8KB on-board memory supports 3 gaming profiles stored on the mouse. [. . . ] (There are 7 colors and a light-off mode to choose from). -3-  MACRO EDITING ENGLISH The macro editing tab allows you easily to record all the commands, including key bindings and the press of mouse button. Each single macro also can be imported and exported onto your hard disk for further usage. Start with: Step 1 Click “Record the duration or intervals” if you’d like to record intervals between two commands. Step 2 Double-click “Cycle through selection of action mode” to change the execute mode. Step 3 Click “Record” to start creating a macro and recording all the keystrokes or mouse commands. Step 4 Click “Stop” to finish recording this macro when a macro is done. Step 5 You can also insert additional commands on the “Quick-insert bar” left. Step 6 After recording a macro, you may drag commands of the macro and drop into “On-board script” to store this macro on the mouse. Step 7 Double-click on the macro scrip to rename this macro. Moreover, you may also change icon of your personal macro through clicking “change icon”. Step 8 Come back to “Button Assign” tab, the macro you had built would become one application of “Macro scrip” in this tab. [. . . ] You can set the report rate to 125Hz (8ms), 250Hz (4ms), 500Hz (2ms), or 1000Hz (1ms) by moving the knob on the slider. Scrolling You can adjust vertical & horizontal scroll wheel speed by moving the knob on the slider. [. . . ]