User manual GIGABYTE MD70-HB0

[. . . ] 1201 Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors Copyright © 2014 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations:  For detailed product information, carefully read the User's Manual. For more information, visit our website at: http://b2b. gigabyte. com You are a professional? [. . . ] Default setting is Legacy only. Other PCI devices Determines OpROM execution policy for devices other than network, Storage, or Video. Options available: UEFI first/Legacy only. Default setting is UEFI first. - 57 - BIOS Setup 2-2-5 Post Report Configuration Post Report Configuration Error Message Report Post Error Message Enable/Disable Info Error Message support. Default setting is Enabled. BIOS Setup - 58 - 2-2-6 Trusted Computing Configuration Security Device Support Select Enabled to activate TPM support feature. Display current TPM status information. Current Status Information - 59 - BIOS Setup 2-2-7 USB Configuration USB Configuration USB Devices: Legacy USB Support Display the USB devices connected to the system. Enables or disables support for legacy USB devices. Options available: Auto/Enabled/Disabled. Enable/Disable XHCI (USB 3. 0) Hand-off support. Enable/Disable EHCI (USB 2. 0) Hand-off function. Enable/Disable USB Mass Storage Driver Support. Default setting is Enabled. XHCI Hand-off EHCI Hand-off USB Mass Storage Driver Support(Note) Port 60/64 Emulation Enable I/O port 60h/64h emulation support. This should be enabled for the complete USB Keyboard Legacy support for non-USB aware OS. Default setting is Enabled. (Note) This item is present only if you attach USB types of device. - 60 - BIOS Setup 2-2-8 Chipset Configuration Restore on AC Power Loss (Note) Defines the power state to resume to after a system shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. When set to Stay Off, the system remains off after power shutdown. Options available: Last State/Stay Off/Power On. The default setting depends on the BMC setting. Configure ystem fan curve mode Options available: Performance Mode. Enable/Disable Chassis intrusion alter funtion. Display the chassis opened status. Deep Sleep (EuP) Fan Curve Mode Chassis Opened Warning Chassis Opened Status (Note) When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the last power state. - 61 BIOS Setup 2-9 SIO Configuration BIOS Setup - 62 - AMI SIO Driver Version Super IO Chip Logical Device(s) Configuration [*Active*] Serial Port 1/2 [*Active*] PS2 Keyboard [*Active*] PS2 Mouse Press [Enter] for confuguration of advanced items. [. . . ] Options available: Yes/No. BIOS Setup - 118 - Boot Override UEFI: Built-in in EFI Shell Press Enter to configure the device as the boot-up drive. Press <Enter> on this item to Launch EFI Shell from filesystem device. - 119 - BIOS Setup 2-8 BIOS Beep Codes # of Beeps 5 Memory error during POST. Description BIOS Setup - 120 - 2-9 BIOS Recovery Instruction The system has an embedded recovery technique. [. . . ]