User manual GIGABYTE ME-B02

[. . . ] * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!* The WEEE marking applies only in European Union's member states. The trademarks mentioned in the manual are legally registered to their respective companies. The written content provided with this product is the property of Gigabyte. [. . . ] If you use a 24-pin ATX power supply, please remove the small cover on the power connector on the motherboard before plugging in the power cord ; otherwise, please do not remove it. The cooler fan power connector supplies a +12V power voltage via a 3-pin / 4-pin power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. the black connector wire is the ground wire (GND). Remember to connect the CPU/system fan cable to the CPU_FAN/SYS_FAN connector to prevent CPU damage or system hanging caused by overheating. The FDD connector is used to connect the FDD cable while the other end of the cable connects to the FDD drive. Before attaching the FDD cable, please take note of the foolproof groove in the FDD connector. Please refer to the BIOS setting for the SATA 3Gb/s and install the proper driver in order to work properly. The PWR_LED connector is connected with the system power indicator to indicate whether the system is on/off. Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front panel to the F_PANEL connector according to the pin assignment below. This connector supports either HD (High Definition) or AC97 front panel audio module. If you wish to use the front audio function, connect the front panel audio module to this connector. Check the pin assignments carefully while you connect the front panel audio module. Incorrect connection between the module and connector will make the audio device unable to work or even damage it. For optional front panel audio module, please contact your chassis manufacturer. Use this feature only when your stereo system has digital input function. Use SPDIF IN feature only when your device has digital output function. be careful with the polarity of the SPDIF_IO connector. Check the pin assignment carefully while you connect the SPDIF cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. [. . . ] A small portion of system memory will be shared when Intel ® QST is enabled. Incorrectly using these features may result in system instability or corruption. Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in damages or shortened life expectancy to these components. Please be aware that the menu items are for power users only. [. . . ]