User manual GIGABYTE P2742G

[. . . ] Congratulations on your purchase of the GIGABYTE Notebook P2742! This Manual will help you to get started with setting up your notebook. For more detailed information, please visit our website at http://www. gigabyte. com. [. . . ] The table as below illustrates the basic settings for each power mode. If you choose user defined the settings will correspond to your selected system settings. Modes Icon Power Plan Power Conservation Mode Brightness PlanBrightness WLAN Bluetooth PC Camera 3G TouchPad OFF OFF ON OFF OFF ON OFF OFF OFF ON OFF ON Power Saver Energy Star 14 OFF Balanced BIOS Default 42 OFF Power Saving Energy Star 100 ON Power Saving Energy Star 42 ON High Performance Performance 100 ON Power Saving Flight Entertainment Quiet Performance User Defined User Defined 8 English Power Status The Power Status icon will show whether you are currently powered by the battery, or by the AC/DC adapter plugged in to a working power outlet. The power status bar will show the current battery charge state. Brightness The Brightness icon will show the current screen brightness level. You can use the slider to adjust the screen brightness or the Fn+F8/F9 key combinations, or use the Fn+ F2 key combination to turn off the LED backlight (press any key to turn it on again). Note that screen brightness is also effected by the Power Mode selected Volume The Volume icon will show the current volume level. You can use the slider to adjust the Volume or the Fn+F5/F6 key combinations, or use the Fn+ F3 key combination to mute the volume. Power Conservation This system supports Energy Star power management features that place computers (CPU, hard drive, etc. ) into a low-power sleep modes after a designated period of inactivity. Click either the Performance, Balanced or Energy Star button. Click in a blank area of the icon or press a key on the keyboard to exit Power Conservation Mode without making any changes. Sleep Click the Sleep button to bring up the Hibernate or Sleep buttons, and click either button to have the computer enter the appropriate power-saving mode. Click in a blank area of the icon or press a key on the keyboard to exit Power Conservation Mode without making any changes. [. . . ] T 2.  wo options will appear when entering into T Smart Recovery. 3.  oth 64-bit and 32-bit systems will be B restored back to factory defaults when pressing "Start" button. 4.  ou can choose to restore either the 64-bit or Y the 32-bit system back to its factory defaults in "Advanced Option" (select from the submenu after pressing "Advanced Option"). 5.  ress "Exit" to quit from Smart Recovery. P 7 Appendix ■ Warranty & Service: For Warranty, Service and related information, please refer to the warranty card or GIGABYTE service website as the following link: http://www. gigabyte. com/support-downloads/technical-support. aspx ■ FAQ: For FAQ (Frequent Asked Questions), please refer to the following link: http://www. gigabyte. com/support-downloads/faq. aspx [. . . ]