User manual GIGABYTE Q1742F

[. . . ] Manuals to be read on your computer The following manuals are automatically installed on your computer after you set up your CLIÉ handheld and computer. b For details on each manual, refer to "Using CLIÉ Manuals with your computer" on page 35. Applications Guide (PDF format*) Introduces the supplied applications and briefly explains how to use them. Handbook (PDF format*) Explains the basic operations and advanced features of your CLIÉ handheld. CLIÉ Application Manual (HTML format**) Explains how to use the supplied applications in detail. Troubleshooting Q&A (PDF format*) Helps in solving common problems that you may have while using your CLIÉ handheld. * You can read the manual on your computer using Adobe Acrobat Reader. If Adobe Acrobat Reader is not installed on your computer, install it from the supplied Installation CD-ROM. ** You can read the manual on your computer using an Internet browser. 2 Before use Caution IN NO EVENT SHALL GIGABYTE BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING WITHOUT LIMITATION LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER'S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE. On the supplied software · Copyright laws prohibit reproducing the software or the software manual in whole or in part or renting the software without the permission of the copyright holder. [. . . ] Connect your CLIÉ handheld to the AC power adapter with the plug adapter, then allow it to be charged for a few minutes before turning it on. If it turns on, continue charging for approximately four hours and then perform a soft reset. B Is the connector between your CLIÉ handheld and the plug adapter dirty?You cannot charge your CLIÉ handheld if the connector is dirty. Connect and disconnect your CLIÉ handheld and the plug adapter several times to clean the connector. B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld (page 32). The screen is not displayed even though the POWER LED is on B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode (page 61) ?The screen is not displayed when the POWER/HOLD switch is in HOLD mode. B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld (page 32). My CLIÉ handheld does not respond B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode (page 61) ?Your CLIÉ handheld does not operate when the POWER/HOLD switch is in HOLD mode. B Is your CLIÉ handheld placed near the IR port of your computer?Move your CLIÉ handheld away from the IR port of your computer except when performing the IR HotSync® operation, as a malfunction may occur. B Is the operating system on your computer compatible?The following operating systems are compatible with your CLIÉ handheld. Operating systems other than the following are not supported. · · · · Microsoft Windows 98 Second Edition Microsoft Windows 2000 Professional Microsoft Windows Me Microsoft Windows XP Note Upgrade versions of operating systems are not supported. Continued on next page ····················· 47 B If you are using Windows 2000 Professional or Windows XP, log in as an "Administrator. " B Is the USB cable properly connected to your computer (page 18)?B Is (HotSync) displayed in the task tray (Notification area) at the bottom right of your computer window?If not, click [Start], select [Programs] ([All Programs] for Windows XP)-[Sony Handheld], and click [HotSync Manager] to start HotSync Manager. B Is [Local USB] in the shortcut menu selected?(You can display this by clicking (HotSync) in the task tray (Notification area). ) If not, select [Local USB]. Check whether the USB port works normally by connecting another USB device, such as a USB mouse. B If you use an extended terminal devices for laptop computers, such as a port replicator, you may not be able to use either the port replicator or the USB port of your computer. B Quit all applications other than PalmTM Desktop for CLIÉ. If you cannot perform the HotSync® operation even after following the above instructions, perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld (page 32). For particular problems regarding the HotSync® operations, refer to the following. I cannot start the HotSync® operation by tapping (HotSync) on the HotSync screen B Ensure [Local] and [Cradle/Cable] are selected in the HotSync screen. [. . . ] "Memory Stick" media is write-protected. "Memory Stick" media is not read correctly. A "Memory Stick" compatible device is inserted. Tap the icon to display the Media Info dialog box when "Memory Stick" media is inserted. [. . . ]